Search tips
Showing 787 results View by: Thread Post Sort by
    Answered

  • TMS570LS0432: Have the TMS570LS0432 MCU CAN auto-addressing function?

    Resolved
    Part Number: TMS570LS0432 Other Parts Discussed in Thread: BQ76PL455EVM , TIDA-020032 , Hi,I use the TMS57LS0432 MCU and bq76PL455EVM to do BMS research. I find the document "Design Guide: TIDA-020032" the module support CAN auto-addressing function…
    • Resolved
    • Answered

  • TMS570LS0432: PLL under cycle slip causes CAN communication failure

    Resolved
    Part Number: TMS570LS0432 Other Parts Discussed in Thread: HALCOGEN Hi BU experts, My customer found 7 pcs TMS570LS0432-based board have no CAN output under low temperature (-40 °C). They did low temperature test on the failure board and I supported them…
    • Resolved

  • RE: TMS570LS0432: VCC supply in the recommended range and VCCIO supply is not in the acceptable range

    QJ Wang said: nPORRST: 1ms setup time is a MUST. It is nice to meet the 1ms hold time. My statement is not correct. What I want to say is that "1ms hold time is a MUST, but it is nice to meet 2us setup time".

  • TMS570LS0432: JTAG Interface

    TI Thinks Resolved
    Part Number: TMS570LS0432 Hi Team, Could you please share the correct connections for JTAG 10 pin interface? Below is customer drawing and they are looking for feedback. Thanks! Reed

  • TMS570LS0432: and TMDSEMU110-U?

    TI Thinks Resolved
    Part Number: TMS570LS0432 Other Parts Discussed in Thread: TMDSEMU200-U , TMDSEMU110-U Dear Team, can TMDSEMU110-U debugger be used? Or does it have to be TMDSEMU200-U? Thx and regards!
    • Answered

  • TMS570LS0432: SCI interrupt not work normal.

    Resolved
    Part Number: TMS570LS0432 Other Parts Discussed in Thread: BQ76PL455EVM I am trying to program the TMS57004 Launchpad with the sample code provided by TI to work with the BQ76PL455EVM. I set the RTI 100ms to update battery data, 100ms polling SCI notification…
    • Resolved
    • Answered

  • TMS570LS0432: TMS570 CAN Bus arbitration load.

    Resolved
    Part Number: TMS570LS0432 HI, I use TMS570 MCU CAN Bus functions. I want do load the CAN ID and data. how to write the code do to that? I set the message box9 ID is 0x14EA01EF. I set the int variable "u32temp" to read the ID,but it can work.…
    • Resolved

  • TMS570LS0432: TMS570LS0432 How to modify CANBUS id to receive on mailbox2.

    TI Thinks Resolved
    Part Number: TMS570LS0432 Other Parts Discussed in Thread: HALCOGEN Hi, I used the CANBUS sample code on TMS570LS0432. I have a question for CANBUS modify id. When the CAN transmit data length over 8 bits. I should modify CAN id,that can put the back data…

  • TMS570LS0432: debugger issue

    TI Thinks Resolved
    Part Number: TMS570LS0432 Hello TI, I am using TMS570LS0432, XDS200 debugger. INitially everything works. After new code chnage (code tested on TMS EVM but using XDS100v3 debugger by team member); i get following below errors but I use XDS200 instead…
    • Answered

  • TMS570LS0432: Decoupling caps

    Resolved
    Part Number: TMS570LS0432 Hi, I would like to double check the recommended decoupling caps and values for this uC. Vccio has 4 pins and Vcc has 7 pins. Is it recommended 1 cap per pin and a bulk capacitor? We are using minimum functionality of the uC…
    • Resolved

Didn't find what you are looking for? Post a new question.