Part Number: TMS570LS3137 Hi,
I'd like to have secondary bootloader on Bank1 to update main bootloader on Bank0.
Also i have the application on bank1.
I am on CCS9.3
Linker commad file is like below:
MEMORY { BOOTVECTORS (X) : origin=0x00000000 length…
Part Number: TMS570LS3137-EP Other Parts Discussed in Thread: HALCOGEN Hi,
As per the processor data sheet, there are 2 different set of registers available to configure the MAC address.
1. MACSRCADDRLO and MACSRCADDRHI
2. MACADDRLO and MACADDRHI for each…
Part Number: TMS570LS3137 Other Parts Discussed in Thread: HALCOGEN ,
Hi, I wanted to send data via CAN1 CAN2 and CAN3 pins on Hercules Launchpad. I can send data from CAN1 and CAN2 pins properly with the "canTransmit()" command. But I could not observe…
Part Number: TMS570LS3137-EP Other Parts Discussed in Thread: TMS570LS3137 Hello TI,
We are using TMS570LS3137 processor. We have done SCI and DMA configurations as given below
SCI:
Multibuffer mode - Enabled
Rx DMA - Enabled.
No.of bytes - 8
DMA:
…
Part Number: TMS570LS3137
Hi team,
The customer has the following question:
Can the dmm module of this control chip be used to write registers for all modules? Or can it only modify RAM? The entire 4GB address space can be modified according to the technical…
Part Number: TMS570LS3137 Hi,
Is there a way to shutdown the controller through any registers. I want to shutdown when there are unrecoverable errors during boot up (like ECC error, E-fuse error).
Part Number: TMS570LS3137 we are using TMS570LS3137 microcontroller in our design. we need to understand Figure 7-1. MibADC Input Equivalent Circuit in more detail.
we need to calculate input ADC current. our Analog input voltage is given to pin AD1IN[4…
Part Number: TMS570LS3137-EP Other Parts Discussed in Thread: TMS570LS3137 We are using TMS570LS3137 in our project and we implemented external Hardware circuitry for watchdog functionality. In case of any failures SW will invoke failsafe function which…
This issue is not listed in the device errata. The following code was suggested to us by TI some time back for another project with the same processor.
2. We know that the device behaviour cannot be guaranteed above 180MHz but could you please give…
