Part Number: TMUXHS4412 Hello Team,
I am using TMUXHS4412 in my design. I have connected the mux to the Arra10 FPGA Serdes (Bank 1G,1H,1I) (Arria 10 Part no:10AX057N2F40E2SG).The supply voltage provided for the MUX is 3.3V.The Bank voltage provided for…
Part Number: TMUXHS4412 Other Parts Discussed in Thread: HD3SS215 , TS3DV642 Dear Sir,
In TMUXHS412 data sheet, its application :
8.1 Application Information
The TMUXHS4412 is an analog 4-channel high-speed mux/demux type of switch that can be used for…
Part Number: TMUXHS4412 dear team
about the ac coupling placement, my customer has some concern, and want to use less quantity cap on board. please give some advice
common voltage is 0.9V on board. so don't need ac in 4412 RX
redriver TX has AC …
Part Number: TMUXHS4412 Other Parts Discussed in Thread: DS160PR421 , DS160PR412 I am planning to use the Passive Mux/DeMux (TMUXHS4412) in conjunction with DS160PR412/DS160PR421 to split PCIe traffic from a Host PC to 4x SSDs.
Can you confirm my under…
Part Number: TMUXHS4412 Hi
We are developing USB 3.2 tester . Our FPGA is not supporting Rx Detect on the Host side. We have planned to use mux circuit to detect the device attached in the Bus. For Rx detection. We are sending 0.6V short pulse and measuring…
Part Number: TMUXHS4412 Other Parts Discussed in Thread: HD3SS3415 Hi Team,
We have received this inquiry from our customer regarding the TMUXHS4412,
In the datasheet the common-mode voltage for the 1.8V and 3.3V is different. Whether this common-mode voltage…
Part Number: TMUXHS4412 Hi team,
Customer has a design using TMUXHS4412, due to via return path, is that ok to connect pin 1, 2, 12 to GND?
Best regards,
Oliver
