Part Number: TNETE2201B Dear Forum members
I am working on PCB design Project in which I need to interface Spartan-7(XC7S50) with TNETE2201BPJW(1.25-gigabit ethernet transceiver). Please guide me.
TNETE2201BPJW Datasheet: https://www.ti.com/lit/ds/symlink…
Part Number: TNETE2201B Drew,
Sorry for the long delay in responding to your question. We have been trying a lot of different things trying to get our setup working.
We also had doubts that our clock was meeting the jitter requirement based on the timing…
Part Number: TNETE2201B We are trying to interface to the TNETE2201B with an FPGA that is being driven by a crystal reference. The jitter requirement on REFCLK is very tight at 40ps, though, and we are concerned that the FPGA could add jitter to the REFCLK…
Part Number: TNETE2201B
Hi Nasser,
Could you answer that this event does not occur except for Autonego / C / code?
Following E2E is already locked, so I make a related question.
https://e2e.ti.com/support/interface-group/interface/f/interface-forum/977447…
Part Number: TNETE2201B
Dear Technical Support Team,
When specific data is received, 62.5MHz clock waveform supplied by RBC0 continues abnormally.
At this time, K28.5 is input regularly, however SYNC doesn't show High (SYNCEN is enable).
This issue…
Part Number: TNETE2201B Other Parts Discussed in Thread: TLK2201B Hi Team,
I have some questions about TI chip: TNETE2201B (1.25Gbps Ethernet transceiver).
I want to use the TNETE2201B in an application that is not Ethernet . I want to connect the TNETE2201B…
Other Parts Discussed in Thread: TNETE2201B , TLK10031 Hi,
Our customer would like to know the maximum junction temperature(operating) of TNETE2201B.
Is it 125 degree?
Best Regards, itabi
Other Parts Discussed in Thread: TNETE2201B Hi,
My customer is considering TNETE2201B.
1.When measuring Jitter in REFCLK, how should frequency setting of TIE Filter(Oscilloscope) be done? (?MHz ---> ?MHz) When my customer measured without TIE filters…
Other Parts Discussed in Thread: TNETE2201B , DP83865 I would like to provide electrical isolation between two Ethernet interfaces. I think the easiest way is to use a pair of Cu-Fiber converters joined by fiber. However, I also need to have 1G speed throughput…
Other Parts Discussed in Thread: TLK1211 , TNETE2201B , TLK1221 Dear all,
Cold you teach me that TLK1211 and TNETE2201B have memory ?
If they have memory, let me know what kind and capacity.
Thanks !
Akihiro Kudo
