Part Number: TPD12S016 Tool/software: Hi Sirs
If we only want to use 5V load switch function and ESD protection on HDMI signal trace, can TPD12S016 works fine if I leave HPD_B unconnected?
(HPD pin from HDMI connector we will connect to another chip…
Part Number: TPD12S016 Hi,
We are using TPD12S016 as an HDMI companion/protection device, and we would like to confirm the power-up / power-down sequencing requirements.
In our system, we have:
VCC5V supplied from a 5 V rail (related to the…
Part Number: TPD12S016 Hi Team,
I am using TPD12S016PW IC for the HDMI ESD protection and using IT62633 chipset for the LVDS to HDMI converter this is due to my core processor supports only LVDS interface.
I have validated LVDS chipset, its dedeicated…
Part Number: TPD12S016 Tool/software: Hello Team,
In the datasheet only maximum operating temperature is provided as -40 to 85, and for the power of 0.209 W I am getting at maximum ambient temperature 85degC, Tj as 104.85 degC. How will I consider…
Part Number: TPD12S016 Tool/software: Hello expert,
Do you have suggested solution for automotive grade TPD12S016P? If no, do we have -40C~105C TEMP range for TPD12S016P ? Thanks a lot!
Best regards,
Ann Lien
Part Number: TPD12S016 Tool/software: I am using TPD12S016PWR device in my application.
I have one question on PIN # 5, LS_OE.
I want to permanently Enable this Load Switch device and don't want any GPIO control on this pin.
Can this pin to directly…
Part Number: TPD12S016 Tool/software: Hi Team,
I have enclosed the schematics for review.
Processor is 1.8V complaint.
Clarification required:
a) LS_OE and CT_HPD are pulled high, is this hold good?
b) HDMI_HPD_CON signal is terminated with…
Part Number: TPD12S016 I'm trying to use the TPD12S016PWR on the HDMI output of a Raspberry Pi CM5. The max resolution it offers me when the TPD12S016PWR is installed is only 1024 x 760 although the monitor supports up to 2560 x 1440 which I can get if…
Part Number: TPD12S016 Tool/software:
Hi TI Team,
Need your help here with TPD12S016PWR part.
I have an HDMI connection in my board and intended for video rendering alone.
I don't purpose it for CEC or HEAC or ARC or anything else.
In that context…
