Part Number: TPD13S523 Dear *,
can you tell is it ok to use TPD13S523 for HDMI 2.0 ? If not do you have a similar integrated part for HDMI 2.0 ?
If there is no integrated part can you propose ESD diode for the control and high speed signals , also…
Good day Cameron,
I don't have a schematic yet.
My question is: does the TPD13S523 operate with 1080p @ 50Hz?
Datasheet says it supports HDMI 1.4, but this standard supports 720p @ 50Hz or 1080p @ 24Hz
But HDMI 1.4b supports 1080p @ 120 Hz
So…
Part Number: TPD13S523 Other Parts Discussed in Thread: TPD5S116 Dear Sirs,
My customer asked us about behavior in short mode of TPD13S523 .
I found the following description about the short mode of 5 V OUT and GND.
The short-circuit protection…
Part Number: TPD13S523 Hello,
We need to swap D+ and D- for the various TMDS lines on the UQFN package.
The related question asks this, but the answer does not make sense. We are not changing +/- at the driver side or the receiver side, we just want…
Part Number: TPD13S523 Hi INT team,
I'm posting this question on behalf of my customer.
Their TMDS pairs were pinned out reverse polarity. The D+ and D- pairs are connected to the TPD13S523 D3- and D3+, respectively.
The question is, will this cause…
We have received the prototype boards and observed that when TPD13S523 mounted in the board, HDMI is not working.When we removed this part, HDMI interface works
Part Number: TPD13S523 Hi Team,
in the RSV package the routing is not optimal anymore. Is it possible to swap D+ and D- pins to make the routing easier?
Thank you for your time!
Best regards,
Simon
Part Number: TPD13S523 Other Parts Discussed in Thread: TPD4E02B04 Hi,
I am designing a system for USB-C HDMI alternate mode and would like some recommendations for the ESD protection. Please see my system diagram below:
I am looking for ESD protection…
