Part Number: TPD1E01B04 Other Parts Discussed in Thread: TPD4E05U06 Hi Team,
My customer use our TPD1E01B04 in their high speed signal.
In the datasheet typical application capture, we show that for the USB2 we suggest to use TPD4E05U06.
May we know what…
Part Number: TPD1E01B04 Other Parts Discussed in Thread: SN74LVC1G126 , Hi team,
my customer now have an application scenario. The normal input voltage of the SN74LVC1G126 buffer is 3.3V ( the max voltage on the datasheet is 6.5V ), but the hot-swap device…
Part Number: TPD1E01B04 Other Parts Discussed in Thread: LMH1227 , LMH1228 , Hi support teams,
Our custmer use LMH1227(LMH1228).
If they connect a bad quality SGI cable to connector , LMH1227 was broke down.
Thie reason might be that unexpected voltage biased…
Part Number: TPD1E01B04-Q1 Hi Experts,
My customer is looking for an ESD protection device for PCIE and 10G-Base Ethernet application? Do you have any recommendation? We need automotive part, how about TPD1E01B04-Q1? Thanks.
If your customer still needs a higher surge performance device for the TMDS pins, the best fit based on the competitor devices you shared would be ESD204. It has a line capacitance that is on par with the competitor devices of 0.55 pF, and…
Part Number: TPD1E01B04 Hi team
The customer wants to switch from X1SON package to smaller X2SON package, and I am wondering if you c ould help check if the spec performance is the same for both X2SON package and X1SON package? Thank you.
Part Number: TPD1E01B04-Q1 Other Parts Discussed in Thread: ESD401 , TPD1E10B06 ,
Could you help to recommend the ESD diode for the UB933 and UB954? What’s the maximum IO cap for the FPD-link for these two parts?
Customer want to know what…
Part Number: TPD1E01B04-Q1 Other Parts Discussed in Thread: STRIKE , TPD1E10B06-Q1 , TPD2E2U06-Q1 , TPD1E01B04 , ESDS312 , TPD1E1B04 , ESD321 Dear team,
My customer plans to use this device, and their test requirement is as below. Their requirement is 25kV air…
Part Number: TPD1E01B04 Other Parts Discussed in Thread: TPD2E007 , Hi,
I would like to use TI's ESD diodes for my application. I have 4 different communication protocol. I have very limited space on the board so if possible please suggest some small parts…