• 

  pragash sangaran78

  • 5 months ago
  • Interface
  • Interface forum

  TPD1E04U04: will this diode clamp 20V DC at 3A?

  • Resolved

  Part Number: TPD1E04U04 We are planning to use TPD1E04U04 for VBUS line of MicroUSB in our design
• 

  Ashokn

  • 9 months ago
  • Interface
  • Interface forum

  TPD1E04U04: TPD1E04U04

  • Resolved

  Part Number: TPD1E04U04 Hi, I am trying to decide between ESD351 Vs TPD1E04U04 to achieve lower
• 

  Matt Smith3

  • 1 month ago
  • Interface
  • Interface forum

  RE: TPD6E05U06: Clapmping voltage question

  Hello XY, These are excellent questions. 1. For the abs max rating of the MCU, this is for continuous DC voltages, not transient voltages. This means that although it says that the max value is 4 V, it can still withstand a transient event for...
• 

  Matt Smith3

  • 2 months ago
  • Interface
  • Interface forum

  RE: ESD321: How to check a TVS clamping voltage against an IC absolute maximum ratings

  Hello Stefano, You are correct on your equation. If the AMR for the ADC is 5.3 V, I would not recommend having a clamping voltage any higher than that. With that being said, I did find another part that could possibly fit your needs. TPD1E04U04 offers...
• 

  Cameron Phillips

  • 10 months ago
  • Interface
  • Interface forum

  RE: TPD1E04U04: Functional diagram

  Hello, As I said previously the architecture is the same for both devices even though the diagram is different. The benefit is in the comparison of each or the electrical characteristics.
• 

  MarcoB

  • 1 month ago
  • Interface
  • Interface forum

  RE: DP83825I: Hot insertion with capacitive coupling - broken PHY

  Yes, I have 4x TPD1E04U04 ESD diodes on board inserted between PHY and capacitors, one from each ethernet line to ground, Is it enough? DP83825I seems very very weak on MDI interface. Thanks, Marco
• 

  Obi Oji

  • over 1 year ago
  • Interface
  • Interface forum

  RE: TPD1E04U04: Understanding ESD requirements

  Hi, Thanks for the questions, the abs max rating for the device is specified for a DC voltage while the clamping voltage is for an ESD nS duration waveform and most devices with a DC abs max of <5V can sustain ESD clamping voltage >10V, which...
• 

  Andy Robles

  • 3 months ago
  • Interface
  • Interface forum

  RE: TPD1E1B04: Query about clamping voltage of TPD1E1B04

  Hi Ritul, Welcome to E2E! For IEC 61000-4-2 a 4kV ESD strike corresponds to 8A TLP current and 8kV corresponds to 16A TLP current. Click this link for more info on ESD clamping voltage. Per the TLP curve of the TPD1E1B04 at 4kV the clamping voltage...
• 

  Dennis Lehman

  • 5 months ago
  • MSP low-power microcontrollers
  • MSP low-power microcontroller forum

  RE: MSP430FR2633: Maximum Capacitance on All External Electrodes on all Captivate Blocks

  Hi Ahmed, I asked our analog designer to confirm and he is indicating otherwise. This spec is assuming a device with 4 measurement blocks, which the FR2633 does and that you are scanning in parallel. At 4MHz, the maxium is 75pF / channel or 4 x...
• 

  Yi Tien Lin

  • over 1 year ago
  • Interface
  • Interface forum

  TPD1E04U04: Reflow information of TPD1E04U04

  • Resolved

  Part Number: TPD1E04U04 Hi Sir, My customer needs the reflow information of TPD1E04U04 as below

Didn't find what you are looking for? Post a new question.

• Ask a new question