Part Number: TPD1S414 Other Parts Discussed in Thread: TVS2200 , TVS1800 , , TPD1S514 Tool/software: I have a customer designing a high volume product with USBC, but only 5V VBUS (no PD). They would like to protect against the case of a non-compliant USBC…
Part Number: TPD1S414 Hi Team,
There is a good new that Customer is searching TI solution
Do we have a product that can compete with "NX5P3090UK" ?
1. It seem that TPD1S414 can fight with TS391ILT ,is there anything I need to pay attention…
Part Number: TPD1S414 Other Parts Discussed in Thread: TPS25810 Hi,
Customer is using TPS25810+TPD1S414 based on the APN : ( https://www.ti.com/lit/pdf/slvae35) for their type-c port
From TPD1S414, we see VOVP_RISING is in the range from 6 to 6.4V which…
Part Number: TPD1S414 Other Parts Discussed in Thread: TPD3S714-Q1 , TPS25221 Hi team,
I want to check whether TPD1S414 supports reverse current block? The internal MOSFET is a single fet or dual fets(back to back)?
Part Number: TPD1S414 Hi Team ,
quick check , in the d/s block diagram shown, the DC caps of VBUS_CON and VBUS_SYS are connected to GND right?
the block diagram looks forget to add a node , which causing customer confuse , kindly help to check on this…
Part Number: TPD1S414 Hi All
My customer noticed what i believe is a discrepancy in the data sheet. if tdelay is 20msec and tss is 25ms how come the rise time in figure 8 shows 27ms? Data sheet also states teh start up time is tdelay plus tsoftstart…
Part Number: TPD1S414 Hi Team,
Customer is using ET9531( http://www.etek.com.cn/product.asp?ID=245 ) in their product, at the USB input port. They need a OVP threshold at 5.9V, same with ET9531. However TPD1s414 has 6.2V typical OVP voltage; The also need…
Part Number: TPD1S414 My customer is developing a new product and is considering reusing our TPD1S414 for a portable equipment.
We are interested to know if we have a newer, better alternate we want to promote?
Part Number: TPD1S414 I have a board that we will be testing with a pogo pin interface. The current jig does not allow me to plug in a USB cable to the board and I didn't provide a testpoint between the connector and the TPD1S414 input. The only place…