• 

  VIPIN K P

  • 13 days ago
  • Interface
  • Interface forum

  TPD2E001: S-parameter of this ESD is required for simulation.

  • Resolved

  Part Number: TPD2E001 I'm using TPD2E001DRL part in my schematics. In order to start Layout work i
• 

  user3756530

  • 13 days ago
  • Interface
  • Interface forum

  TPD2E001: Trouble recommend high temperature resistance (above -40 to 105 °C) PIN TO PIN replacement

  TI Thinks Resolved

  Part Number: TPD2E001 Dears For TPD2E001DRLR, Trouble recommend high temperature resistance (above -40 to 105 °C) PIN TO PIN replacement. Thanks
• 

  Ben Kuo

  • 3 months ago
  • Interface
  • Interface forum

  TPD2E001: looking for Reflow Profiles

  • Resolved

  Part Number: TPD2E001 Dear team, I find a reflow profiles from TI website in below link. I would
• 

  Vincent Chen64988

  • 6 months ago
  • Interface
  • Interface forum

  TPD2E001: ESD got damaged by applying 6KV

  Part Number: TPD2E001 Hi Team, TPD2E001 can withstand ±8-kV contact discharge, but why this part got damaged when my customer only applying 6KV contact discharge on part. Is it related to customer's layout? Thanks a lot. Vincent Chen
• 

  ACGUY

  • 7 months ago
  • Interface
  • Interface forum

  TPD2E001: Anti Lightning Induction

  • Resolved

  Part Number: TPD2E001 Hello E2E, Our customer is using the TPD2E001 on USB_Bus for MCU, it's
• 

  Moshe Avidan

  • 11 months ago
  • Interface
  • Interface forum

  TPD2E001: TPD2E001

  TI Thinks Resolved

  Part Number: TPD2E001 Hi I like to know the operation of this part in case the Vcc is Not powered. 1. What would be the max clamped voltage for the DM, DP pins? 2. Can its ESD operation be guaranteed even when VCC=0v? Thanks
• 

  user6091462

  • over 1 year ago
  • Interface
  • Interface forum

  TPD2E001: I need a comparsion table

  • Resolved

  Part Number: TPD2E001 Hi e2e, My customer use SR2.8 as PHY's ESD now, and I serach ti.com to find
• 

  user6091462

  • over 1 year ago
  • Interface
  • Interface forum

  TPD2E001: I have question about clamping voltage

  TI Thinks Resolved

  Part Number: TPD2E001 Hi e2e, I study TPD2E001 datasheet, but I seem no see clamping voltage. Because datasheet's clamping voltage is Vcc+25V, I guess that it is instantous instead of normally clampling voltage. And, Now I want to make a comparsion...
• 

  Shiou Mei Huang

  • 2 months ago
  • Processors
  • Processors forum

  RE: AM5728： Linux/AM5728: Kernel boot problem

  I reviewed the schematics and recommend the following changes: 1. Use 47 kohms for PU and remove PU resistor from MMC1_CLK path 2. Use the same 3.3 V rail for SD cage for TPD2E001 VCC; also add a 0.1 uF bypass capacitor on each rails Have a great...
• 

  Brian Wang0928

  • over 1 year ago
  • Interface
  • Interface forum

  TPD2E001: PESD12VL2BT

  TI Thinks Resolved

  Part Number: TPD2E001 Is there any product similar to PESD12VL2BT (2ch, bidirectional ESD and 12V) with SOT23 package? application: Encoder for servo motor Regards, Brian

Didn't find what you are looking for? Post a new question.

• Ask a new question