Search tips
Showing 63 results View by: Thread Post Sort by

  • TPD2E007: Alternate part

    TI Thinks Resolved
    Part Number: TPD2E007 Hi Experts, A customer is looking for a drop-in alternative to TPD2E007CKR however, I could not find any. Can you recommend something similar in characteristics and footprint that is on stock? Thanks for the help. Regards…
    • Answered

  • TPD2E007: Want to protect 9kV ESD on RS485-devices.

    Resolved
    Part Number: TPD2E007 Other Parts Discussed in Thread: STRIKE Hi, To protect RS485 devices, TPD2E007 is one of candidate device. His requirement is to protect 9kV ESD, but TPD2E007 is protected 8KV ESD. If he uses TPD2E007 with 9kV ESD, what is happened…
    • Resolved
    • Answered

  • TPD2E007: TPD2E007 can’t meet some spec requirement compared with competitors

    Resolved
    Part Number: TPD2E007 Hi team, I found my customer used ESD of NXP competitors PESD1CAN in their communication module, like CAN, 485. But I promote our TPD2E007 to them but get their feedback as below: ESD need operation temp >=105°C; Need lower…
    • Resolved
    • Answered

  • TPD2E007: I confuse ESD protection and surge protection.

    Resolved
    Part Number: TPD2E007 Other Parts Discussed in Thread: TVS1401 Dear Ti, Below this schematics is connector of RS485.RS422,RS232. Fire_Connector_SCH.pdf 422 connector.pdf That schematics applied ESD & surge protection. That protection parts…
    • Resolved

  • TPD2E007: EFT spec of TPD2E007

    Part Number: TPD2E007 Dear All, I did not find IEC 61000-4-4(EFT)spec at datasheet of TPD2E007. Could you provide IEC 61000-4-4(EFT)spec?

  • TPD2E007: Use of our TPD2E007 with higher protection voltage

    Part Number: TPD2E007 Other Parts Discussed in Thread: TPD4E001 , TPD1E10B09 Hello all, my customer wants to use our TPD2E007 with a higher protection voltage of 10V. See attached picture. Is this possible? Best regards Egon
    • Answered

  • RE: TPD2E007: What is the output voltage of "IO1" and "IO2" when TPD2E007 is protectiong a surge?

    Resolved
    Hello Phillips, Thank you very much for your reply and it is no promlem. I understood that TPD2E007 was only device for RS485. Thank you and best regards, Kazuya Nakai.

  • Replacements of ESD122 and TPD2E007

    TI Thinks Resolved
    Other Parts Discussed in Thread: ESD122 , ESDS302 , TPD2E1B06 , TPD2E007 Hi, I am looking for replacements that has a package larger than ESD122DMXR and TPD2E007DCKR. These parts are too small to mass-produce. ESD122DMXR is used for USB and LVDS…
    • Answered

  • TPD2E007: Difference between schematic of TPD2E007 and TPD2E1B06

    Resolved
    Part Number: TPD2E007 Other Parts Discussed in Thread: TPD2E1B06 Hello, I have a question about the difference between schematic of TPD2E007 and TPD2E1B06. [Q] - Schematic of TPD2E007(D/S p6) - Schematic of TPD2E1B06(D/S p1) What are the intentions…
    • Resolved

  • TPD2E007: Do we have available part to compete with ESDA14V2L?

    TI Thinks Resolved
    Part Number: TPD2E007 Hi team, Do we have Do we have available part to compete with ESDA14V2L? ESDA14V2L datahseet link: https://www.st.com/resource/en/datasheet/esdal.pdf Thanks!

Didn't find what you are looking for? Post a new question.