Search tips
Showing 35 results View by: Thread Post Sort by
    Answered

  • TPD2E2U06-Q1: Usable for 1000base-T1

    Resolved
    Part Number: TPD2E2U06-Q1 Other Parts Discussed in Thread: TPD2E2U06 , DP83TG720EVM-MC , TPD4E05U06-Q1 Dear team, Is TPD2E2U06(-Q1) usable for 1000base-T1 ESD suppressor diode? I feel line capacitance CL=1.5pF is quite high for 1Gbps signal. But DP83TG720EVM…
    • Resolved

  • TPD2E2U06-Q1: ESD FOR CAN

    TI Thinks Resolved
    Part Number: TPD2E2U06-Q1 Dear Team, We are using this same part for all USB, Ethernet, I2C and CAN signal ESD protection. Is any issue if we are using this part on CAN line ESD protection or It can be used.
    • Answered

  • TPD2E2U06-Q1: Question about the grade of AEC-Q101

    Resolved
    Part Number: TPD2E2U06-Q1 Hi Experts, TPD2E2U06QDCKRQ1 is certified in AEC-Q101, what is the grade of AEC-Q101? Or is there no grade of AEC-Q101 ? Best regards, Kobayashi
    • Resolved
    • Answered

  • TPD2E2U06-Q1: Peak pulse current and power

    Resolved
    Part Number: TPD2E2U06-Q1 Hello, What does "tp = 8/20 us" mean for peak pulse current and power specs of 6.1 Absolute Maximum Ratings in p.4 of the datasheet? This should be related to the figure below in p.7 of the datasheet. There are two questions…
    • Resolved

  • TPD2E2U06-Q1: Can this be used with SD Card ESD protection

    TI Thinks Resolved
    Part Number: TPD2E2U06-Q1 Other Parts Discussed in Thread: TPD2E2U06 , Hi, Can I use TPD2E2U06 with the SD Card interface for ESD for the datalines?

  • TPD2E2U06-Q1: Inquiry about ESD diode burnt phenomenon of USB data line.

    Part Number: TPD2E2U06-Q1 Hi TI experts, The ESD diode of the USB data line is destroyed. We know that external damaged items cannot be analyzed for defects. This is a line with no possibility of generating a surge voltage. I want to know the cause of…
    • Answered

  • TPD2E2U06-Q1: RS232 does not work with TPD2E2U06-Q1

    Resolved
    Part Number: TPD2E2U06-Q1 Other Parts Discussed in Thread: TPD2E007 , , TPD1E10B09 Hi, we were using TPD2E007 ESD diodes to protect our RS232 lines. We changed to TPD2E2U06-Q1 to provide +/-20kV air discharge protection. To our surprise, after mounting this…
    • Resolved

  • TPD2E2U06-Q1: IEEE 100BASE-T1

    Part Number: TPD2E2U06-Q1 Hi TI-team My customer has a question. They think this part is a diode that can be used in Ethernet for vehicles. Is the following satisfied ? - OPEN ALLIANCE：IEEE 100BASE-T1 EMC Test Specification for ESD suppression device…
    • Answered

  • [FAQ] I2C Protection

    Resolved
    Back to Interface Home Page I2C Protection Highlights: 2 Lines to Protect Low Capacitance required to minimize signal interference Speeds up to 5Mbps TI Products Recommendations Working Voltage (V) IEC 61000-4-2 ESD Rating (kV) (Contact) …
    • Resolved

  • RE: TCA9517: TCA9517 frequency

    Hi Stas, This sounds good. TCA9517-Q1 will provide buffering and some ESD protection Keeping the 100 ohm series limiting resistor and adding some form of TVS protection diode would be good practice for an automotive application. A protection diode for…

Didn't find what you are looking for? Post a new question.