Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.



Search tips
Showing 19 results View by: Thread Post Sort by

  • TPD2S017: The data signal lines are transmitted through VCC(VUSB).

    Part Number: TPD2S017 Hi Team This is my first question. Please help me. I use the chip TPD2S017 for protection USB. When initializing the USB on the MCU, even without plugging in the USB, the data signal changes to high, and 3.5 volts is measured on…
    • Answered

  • TPD2S017: TPD2S017DBVR top marking

    Resolved
    Part Number: TPD2S017 Hi Sir/Madam, Below is the top marking of part# TPD2S017DBVR: Please help to verify the top marking above since it doesn't match datasheet: Here is the label FYR: Thanks! Best Regards, Michael
    • Resolved
    • Answered

  • TPD2S017: Internal Diodes function of TPD2S017

    Resolved
    Part Number: TPD2S017 Other Parts Discussed in Thread: TPD2E2U06 Hi, Regarding TPD2S017, What’s the function of the diode in red circle? How the circuit works if without VCC?
    • Resolved

  • TPD2S017: ESD protection VCC

    TI Thinks Resolved
    Part Number: TPD2S017 Other Parts Discussed in Thread: ESD122 , TVS0500 Hi, for a ultra low power 3v3 device I need some protection- Usually there is no USB cable connected but the user needs to connect one for updating the mcu or downloading data. Is…

  • TPD2S017: USBDF02W5

    TI Thinks Resolved
    Dear Team Do we have a similiar solution to replace USBDF02W5 ? BR Kevin
    • Answered

  • TPD2S017: About absolute maximum rating of Vcc

    Resolved
    Part Number: TPD2S017 Hi support team, How high is the absolute maximum rating of Vcc? In the datasheet of TPD2S017, there is specification regarding "Recommended Operating Conditions" for Vcc. However, there is no description of the absolute…
    • Resolved
    • Answered

  • TPD2S017: is TPD2S017 symmetrical

    Resolved
    Part Number: TPD2S017 Hi, I found out that on an old Board using the TPD2S017 (TPD2S017DBVR) for USB ESD protection, the USB connector is connected to CH2_OUT/ CH1_OUT instead of CH2_IN / CH1_IN. Is the board still protected? Thank you, Salvo
    • Resolved
    • Answered

  • TPD2S017: TPD2S017 USB Bus protection

    Resolved
    Part Number: TPD2S017 Other Parts Discussed in Thread: TPD4S012 , TPD6E004 , TPD3S014 , TPD3E001 Hi, I am looking for TI product aginst USBLC6-2SC6. I think that Figure 6 of TPD2S017 datasheet shows that TPD2S017 can protect VBUS. Is it correct? I looked…
    • Resolved
    • Answered

  • RE: TPD4EUSB30: TVS diode for MIPI D-PHY 2.1Gbit/s

    Resolved
    Hi Sebastian, Yes, we do have devices that we typically recommended for MIPI interfaces. The devices are: TPD4E1U06 , TPD2S017 , TPDxF003 (EMI filter w/ ESD), TPD6F002 (EMI filter w/ ESD). Please let me know what you think of these recommendations or if…
    • Answered

  • [FAQ] Models

    Resolved
    Other Parts Discussed in Thread: PSPICE-FOR-TI Back to FAQ Home Page Interface Protection Guides Part Recommendation Packaging & Layout Models Transient Standards System/Device Level Design Power Dissipation and Temperature Top…
    • Resolved

Didn't find what you are looking for? Post a new question.