Part Number: TPD6F003 Since i need only 5 data line protection, can i leave floating the unused line in the TPD6F003? If no, which is the best solution to terminate the pins?
Thanks
Part Number: TPD6F003 Hi, we are using the TPD6F003 to provide the ESD protection for the microSD interface as in the following schematics. The interface works correctly for low SD speed modes (clock 50MHz) but it starts having issues with high speed…
Hello,
The DC loss is because there is a 100 Ohm resistor in the TPD6F003.
No I do not believe you will be able to achieve 90% amplitude at 100MHz for this device.
The last question is highly dependent on the board itself. Especially if you connect…
Part Number: TPD6F003 Dear Support Centre,
I would like to obtain ROHS compliance declaration as well as the appropriate datasheet for a Texs Instrument- IC component TPD6F003.
Could you please send over the required information to my email address…
As easy as it is, I'd say it can't hurt. That chip is not only ESD 61000-4-2 compliant, but also serves as a pi EMI filter. We did go ahead and use it in our current prototype and our Spectrum Digital XDS100v3 has had no problems communicating that I…
Hi Naveen,
We don't have any p2p options for these devices, but we do have some other devices that you may be interested in. We have TPD4F003 to replace the TPD4F202 and TPD6F003 or TPD6F002 to replace TPD6F202.
Please let me know if you have any…
Hi Stefan,
We have two 6-ch EMI filters you could use here: TPD6F002 and TPD6F003 . They won't be P2P, the packages will be slightly larger but they are the same channel count. Unfortunately we don't offer any other EMI filters in the tiny DSBGA packages…
Hi Nanjunda,
Please see the attached application chart for some interfaces showing the application of TPD6F003 for Memory SDIO. We were more abstract in the data sheet and in the product folder describing it only as Memory Card. Integrated Protection…
