Part Number: TPD8S009 Other Parts Discussed in Thread: TPD6E05U06 Tool/software:
I am using the following eight-channel TVS ESD protection diode (TPD8S009DSMR) connected to some signals of the MicroSD card as shown in the following diagram, and other…
Part Number: TPD8S009 Tool/software: Dear Sir/Mam Kindly give the grade details(automotive/Industrial/commercial), EOL , FIT Rate with respect to CL=95% , Temp=55 deg C for the above mentioned part number.
Part Number: TPD8S009 Other Parts Discussed in Thread: TPD4E02B04 Hello, I am using DP to eDP 4 lane interface board. For ESD protection I have placed TPD8S009DSMR part to protect my device, but i see when solder the TPD8S009DSMR on the board, the quality…
Part Number: TPD8S009 Provide case details or comments: I wish to replace the obsolete CM1233-08DE from ON Semiconductor, datasheet attached, with the TPD8S009DSMR, if you can confirm it is functionally equivalent. I need help with the pin mapping in…
Hi Team,
TPS8S009 has optional VCC connection pin.
May I know, what is the purpose of this pin and when do we need VCC connection for ESD device in general case?
Thanks a lot!
Andrew
Part Number: TPD8S009 HI,
I'm using the TPD8S009DSMR and TPD4E1DRLR ESD protection for DisplayPort extender board.
I'am routed this board using DP layout constraints, but the board (DP) doesn't work !!
I suspect the ESD protectionsdiodes ! have…
Hi rifo,
Yes, in this case you should use a Vcc = 2.5 V. Regarding the ground, it is always best to have the analog/digital/chassis grounds separated by some inductance. The correct ground to use for the TPD8S009 would be the chassis ground. You want…