Search tips
Showing 27 results View by: Thread Post Sort by

  • RE: TPIC8101EVM: Integral OUTPUT

    Hiroshi-san, I was able to set up an EVM as shown in your exmaple. With the settings give earlier in your thread, I was getting about 4V of deflection on the output as shown in the image below. If the integration time constant field in the GUI was changed…

  • RE: TPIC8101EVM: TPIC8101EVM: No INT / CLK signals from TI GER board - Assuming I need to update

    Marcus, I am glad your EVM is working! Many thanks for update. Regards, John

  • TPIC8101EVM: No clock or int/hold output. Also, SPI responses aren't correct.

    TI Thinks Resolved
    Part Number: TPIC8101EVM Tool/software: Do I need to update the firmware on the TIger board to use the TPIC8101EVM? The SPI responses are not functioning and I don't see a clock or int/hold output on the test points.
    • Answered

  • RE: TPIC8101EVM: GUI Ver.

    Resolved
    John-san, Thank you for your great support. I may post again if I have new questions, but I'll close this thread. Thank you again. Hiroshi
    • Answered

  • RE: TPIC8101EVM: TPIC8101EVM doesn't work fine

    Resolved
    Dear John. Thank you.

  • TPIC8101EVM: No int/hold

    Part Number: TPIC8101EVM The board does not generate any INT/HOLD signal even when i program the GUI according to the instructions. Itooks like a firmware problem like other users had with this device. Best regards
    • Answered

  • TPIC8101EVM: No INT/CLK generated

    Resolved
    Part Number: TPIC8101EVM Hello there I have an issue with my Ti-Ger board, the INT/CLK is not generated. I saw that this issue was solved in a previous thread in the forum, re-flashing the Ti-Ger board so I'm wondering if I can get the firmware and…
    • Resolved

  • TPIC8101EVM: TPIC8101EVM GUI Connection Error

    TI Thinks Resolved
    Part Number: TPIC8101EVM Hello, when I connected my TPIC8101EVM card to the computer it automatically installed a driver. But when I try to start the GUI application, I get an error like "wrong driver installed or driver not installed". I would be very…

  • TPIC8101EVM: Issues Connecting to USB Board

    TI Thinks Resolved
    Part Number: TPIC8101EVM Other Parts Discussed in Thread: PGA450Q1EVM , PGA460 Have been using the PGA450Q1EVM kit successfully until now. GUI is now unable to connect to USB hardware and TI-GER board led is off when plugged in. Programming jumper is removed…
    • Answered

  • TPIC8101EVM: No signal from INT & CLK port

    Resolved
    Part Number: TPIC8101EVM Hi I am suffering same problem with below situation https://e2e.ti.com/search?q=TPIC8101EVM&category=forum In short, INT & CLK signals are not coming out. Thanks
    • Resolved

Didn't find what you are looking for? Post a new question.