FAQ: TPLD > Current FAQ
TPLD uses Floating-Gate One-Time Programmable (OTP) technology to program its parts, as opposed to other Non-Volatile Memory techniques such as eFuses or AntiFuses, or Volatile Memory technologies such as EEPROM or RAM.
Floating…
Part Number: TPLD801-Q1 Other Parts Discussed in Thread: TPLD801 , TPLD1202 , TPLD2001 I have a design using TPLD801-Q1, I like to use in-system programming to program this TPLD, what signal pins that I need to reseved for the programming tool, and how…
Part Number: TPLD2001 We want to use TPLD2001 in our new design.
1-When does the production status change from pre-production to active production?
2-Can i program the TPLD2001 using the microcontroller's i2c interface without using a TPLD programmer…
Hi Jenny,
I moved your thread over to the Logic forum as this product has no relation to MSP devices.
Jenny Chen said: May I know whether the mark point of ICS only identifies the wave segment you want to view, or does it have any other function?…
Hi Jimmy,
1. Yes there are built in oscillators
2. The IOs change with the power supply (single power input).
3. Yes, TPLD1201 should be able to do this.
4. Please download interconnect studio to start designing with TPLD: TPLD-ICS IDE, configuration…
Hi Malcolm,
I guess TPLD programmer generates required signals if it is used for programming. But do I still need something between the possible custom board that is using TPLD1201 and the programmer? Do I need to connect the evaluation module between…
Hi Volker,
My understanding is you are trying to temp program the device without the EVM as the TPLD device is already in the system?
In circuit programming is not something we offer in these two devices unfortunately. It will be a feature in our…
Hi Tee,
No, these devices are not multi-time programmable. All TPLD are one-time programmable with permanent configurations. If you need to permanently program the device during testing, you will need to replace the device with a blank sample to test…
Hi Clément ,
The programmer is a tool for prototyping convenience. It is not intended to be part of the the final schematic. Once the TPLD device is permanently programmed using the programmer, it can be taken out of the socket and soldered to a customer…
