Part Number: TPLD1201-DGS-EVM Tool/software: Hi,
EVM demo is well works, but the IO5 doesn't output H at the following circuit:
Both IO6 and IO7 are good. I can't understand why only IO5 can't go H. Seems Z.
Using demo circuit, IO5 can out…
Part Number: TPLD1201-DGS-EVM Tool/software: Hi,
I think that IO9 output H pulse during startup EVM. Is it true?
Both DFFs has L intial state, so will start L outputs for IO6 and IO7.
But after clicking [CONFIGURE] at the InterConnect Studio, IO6 is…
Part Number: TPLD1201 Other Parts Discussed in Thread: TPLD-PROGRAM , Tool/software: Hi team,
Is it possible to write data to the TPLD1201 without using the TPLD-PROGRAM or EVM?
For example, is it possible to program the TPLD1201, which is already mounted…
Part Number: TPLD1201-RWB-EVM Other Parts Discussed in Thread: TPLD1201 Tool/software: Hi team,
My understanding is that when writing data to the TPLD1201 using the EVM, the data will be erased when the power is turned off unless it is permanently programmed…
Hi Christian,
Is there anything specific you're looking for? We recommend looking at the TPLD1201 EVM user's guide and the ICS user's guide to get started. If you have a programmer and EVM already, you could also program the TPLD1201 Demo from ICS.…
Hi Francois,
EVM stands for Evaluation Module, and can be found under the design and development tab on the TPLD1201 product page. Section 3 of the EVM user guide provides step by step instructions on getting everything setup and ready to program. We…
Hi Jean-Luc,
Yes, Interconnect Studio is a free tool. You can download it or use the web version here: https://www.ti.com/tool/TPLD-ICS
I'm not sure what you mean by the availability duration. It has been released to customers and you can order parts or…
Part Number: TPLD1201 Tool/software: Hi team,
Once the OTP memory of the TPLD1201 is programmed using InterConnectStudio, it becomes a permanent program and cannot be rewritten. Is this understanding correct?
During the design phase, you are configuring…
Hello,
This could work in theory, but TI does not support in system programming with TPLD1201. I thought the question was asking about programming the EVM with the with the device connected to an external board?
Best,
Ian
