Part Number: TPLD2001 Hi team,
Our customer is considering adopting the TPLD2001 and is currently proceeding with simulation evaluation using ICS.
They would like to have the output operate in conjunction with an external voltage source (XTPLD_OFF…
Part Number: TPLD2001 Hi team,
When using the ACMP in the TPLD2001, I believe that the ACMP is turned ON by applying a signal to the PUP pin. Are there any High/Low threshold levels for the PUP input? The device will be operated with Vcc = 5V.
Best…
Part Number: TPLD2001 Hi team,
I would like to inquire about the feasibility of using TPLD2001 in the following application.
Our customer is considering replacing discrete logic or other solutions with TPLD2001 to implement an inline SPI signal path…
Part Number: TPLD2001 Our design requires that we reconfigure TPLD2001 between consequites operations.
SCEU034.pdf document mentions that in chapter 3.2.4 Temporarily Configuring a TPLD Device. We need to write a program for our ARM MCU that would do…
Part Number: TPLD2001 Hi team,
I heard that TPLD2001 was scheduled for release in FY26 Q1, but the product folder is still in Preview status. When is it expected to be officially released?
Best regards,
Kyohei
Part Number: TPLD2001 We want to use TPLD2001 in our new design.
1-When does the production status change from pre-production to active production?
2-Can i program the TPLD2001 using the microcontroller's i2c interface without using a TPLD programmer…
Part Number: TPLD2001 Does TPLD2001 have in-system programming capability? If it does, could TI provide be specific sequence that would need for TPLD2001 in-system programming? Best Regards, Dung Huynh
Part Number: TPLD2001-Q1 Other Parts Discussed in Thread: TPLD2001 Hi, We wanted to use the TPLD2001 to have four 25kHz PWM outputs have there duty cycles controlled via I2C. I wanted to know if there was any way to simulate this in InterConnect Studio…
Part Number: TPLD2001 Other Parts Discussed in Thread: TPLD1202 Hi TI Team,
The customer has issues with TPLD setting as follows, please help answer it.
1. If the Input is set to Pull-up 100kohm, in practice it cannot be pulled down externally. The…
Part Number: TPLD2001
I'm using TPLD-ICS [Rev 1.7.4+1396] to simulate the TPLD2001.
Are the User Registers visible somewhere? I haven't succeeded in finding them, and they aren't mentioned in the User Guide.
[It would be nice to see all the Config…
