Part Number: TPLD2001-RJY-EVM Other Parts Discussed in Thread: TPLD2001-DGS-EVM , SYSCONFIG , TPLD2001 , TPLD1202 I followed the EVM setup guide in terms of connecting the programmer to the EVM and swithcing on SW0. I have also installed the necessary…
Part Number: TPLD2001-RJY-EVM Other Parts Discussed in Thread: TPLD2001 Hi Sir,
May I request the TPLD2001-RJY-EVM PCBA file or layout file?
My client requires the file for debugging purposes.
Part Number: INTERCONNECT-STUDIO Other Parts Discussed in Thread: TPLD2001 , TPLD1202 , USB2ANY We have reactivated our TI PLD project from 2025.
Unfortunately, with the new version InterConnect Studio V1.7.3, we can no longer get our hardware setup…
Part Number: TPLD2001-RJY-EVM Tool/software: Hello,
I encountered an odd behavior while using the watchdog time in a design through test on the EVM.
I had set the following:
Clock select: OSC0/64
Timeout period: 20
Output assertion time: 10…
Part Number: TPLD2001-DGS-EVM Tool/software: I obtained a TPLD2001EVM and created and configured the circuit on the editor. It is a simple circuit that just turns on the output port connected to the LED. I do not know how to make the circuit work on the…
Hi,
I'm able to program via I2C using TPLD2001-RJY-EVM-E2 and a microcontroller with custom software. I thought that the TPLD2001-RJY-EVM-E2 was populated with a production part (it came in a bag marked TPLD2001DGS, however, it has PT2001 written on…
Part Number: INTERCONNECT-STUDIO Other Parts Discussed in Thread: TPLD2001 Hi team,
My customer is considering adopting the TPLD2001 and is currently evaluating it using the EVM. They had been using InterconnectStudio Ver. 1.6, but simulation could…
Hi Frantisek,
The TPLD801 and TPLD1201 cannot be programmed without the TI programmer and EVM. TI can provide pre-programmed devices or samples.
However, TPLD1202 and TPLD2001 can be fully programmed without the TI programmer. The details can be found…
Hi Kyoehi,
We see no issues programming either the TPLD1202 or the TPLD2001 on the same versions of firmware and InterConnect Studio on our side.
Would it be possible to send an image of the EVM when a failure is occuring? If you can also get an image…
