Part Number: TPS2021-Q1 Hello everyone,
Please provide the junction-to-case (Theta-JC) and/or the junction-to-board (Theta-JB) resistance in C/W for the following part: TPS2021IDRQ1
Thank you,
Andres
Part Number: TPS2021 Other Parts Discussed in Thread: TPS2121 Hi Team,
My customer is interested in the TPS2021. Do we have the timing for tSET as defined in Figure 12 of the datasheet?
I see the tON having a 20ms max, however the customer is interested…
Hi!
If we were to service the over-current event by turning the chip off for say 10s and then turning it back on to check if the condition persist, how much wear will this condition cause if the over-current event still persists during the entire duration…
Hi MJ,
1. This pin impacts status reported by TUSB2046 to the USB Host. If the VBUS (PWR) of the downstream port "source their power from the USB cable" this pin should be pulled to 3.3V If not this pin can be tied to ground.
2. OVRCUR should…
Part Number: BQ24195L Other Parts Discussed in Thread: TPS2021 , BQ24195 , BQ25890 Dear all;
We are working with the BQ24195L to charge Android phones ( in Boost mode). The required constant current for the charging process is 1.5 to 2 A .
The only problem…
Other Parts Discussed in Thread: TUSB542 , TUSB321AI , TPS2021 Hello Team,
My customer has found a discrepency in the datasheet and would like clarification. Can you advise on below?
We’re in the middle of coding symbols and have noticed a discrepancy…
