Part Number: TPS2022 Hi Team, Our customer would like to request for the thermal information for TPS2022DR (SOIC). Please let me know this information if available especially for RθJB and RθJC. Only RθJA is available in the datasheet. Thanks! Jonatha…
Other Parts Discussed in Thread: TPS2022 Customer is using TPS2022. I would like to check since this part is having internal over current protection circuit but why part still will damage if current is draw more than 1A?
This is showed at page 2 on…
Hello,
Here is the most recent certificate I could find internally: IEC 60950-1(ed.2), IEC 60950-1(ed.2);am1
/cfs-file/__key/communityserver-discussions-components-files/138/7360.TPS2034D_5F002D002D00_dflfs05_2D00_pwr_5F00_interface_2D00_Safety…
Hi Seong,
Please see below UL E169910 document, it shows "Temp Range" seems not shipping and storage temperature range.
We want to clarify why UL certificate temp range is different with TPS2000C operating junction temperature range. thanks!
QVGS2…
Hi Guy Yater,
Thanks for the response.
When I was going through http://www.ti.com/lit/sg/sszb130b/sszb130b.pdf this document & I found recommended part as TPD8E003.
So now I'm in confusion to use any one of them, Can you please suggest me , which…
Hello,
The UCC3806 is a dual output controller though it can be used in a flyback where only one of the outputs are used to drive the switch it might be better to choose a single output controller. Look at page 46 of the attached under General Purpose…
Siyu,
I think the toggle flip-flop in the block diagram on page one of the spec should have let you know that the max you will get with this device is 50% duty.
Go to page 43 and 44 of the attached and select a more suitable part.
Peter,
i am enclosing the Power Management Guide for 2011. The section you will be interested in starts on page 43 and actual devices listed on page 46, With the minimum information you have given me I would expect that you will want something like…
