Other Parts Discussed in Thread: TPS25810 , TPS2045A , TPS2045 , TPS2514 , TPS2546 Hi All,
For a motor control application I need a suggestion for a power switch.
A USB 2.0 type connection is provided on the board.
This connection requires a 5 Volt…
Hi, Sai loo,
You are correct. All those below parts share same UL report and the test module is TPS2044B, so the protection current is 5A. What's your concern about it?
TPS2041, TPS2042, TPS2043, TPS2044, TPS2045, TPS2046,
TPS2047, TPS2048, TPS2051…
Hello Shelton,
The UL Certificate # can be found on the Certificate of Compliance here .
The IEC 62368-1 test report is attached below.
5148.E169910-A6024-CB-1-Original.pdf
BR,
Seong
Hi Seong,
Please see below UL E169910 document, it shows "Temp Range" seems not shipping and storage temperature range.
We want to clarify why UL certificate temp range is different with TPS2000C operating junction temperature range. thanks!
QVGS2…
Hi Guy Yater,
Thanks for the response.
When I was going through http://www.ti.com/lit/sg/sszb130b/sszb130b.pdf this document & I found recommended part as TPD8E003.
So now I'm in confusion to use any one of them, Can you please suggest me , which…
Hello,
The UCC3806 is a dual output controller though it can be used in a flyback where only one of the outputs are used to drive the switch it might be better to choose a single output controller. Look at page 46 of the attached under General Purpose…
Siyu,
I think the toggle flip-flop in the block diagram on page one of the spec should have let you know that the max you will get with this device is 50% duty.
Go to page 43 and 44 of the attached and select a more suitable part.
Peter,
i am enclosing the Power Management Guide for 2011. The section you will be interested in starts on page 43 and actual devices listed on page 46, With the minimum information you have given me I would expect that you will want something like…
