Part Number: TPS2062 hi Team,
OEMs wants to project the voltage input to the battery pack.
the abs max voltage for the pack+ pin is 30V, they concern that externally might have 48V from the adaptor if the front end malfunction
the maximum current that…
Part Number: TPS2062 Please send it after filling out the specification comparison table for our mass-produced products and the two materials that are in stock at ti.com below.
M3201-000632
TI.COM
TI.COM
TPS2062QDGNRQ1
TPS2062DGA4
…
Part Number: TPS2062 The datasheet says the input is TTL and CMOS compatible, but does not mention if there is an internal pulldown or pullup. Can it be left unconnected?
Part Number: TPS2062 Hi,
This is David from Bureau Veritas Taiwan, the third-party testing laboratory in Taiwan. We're dealing with a multimedia product to get it tested in terms of Taiwan regulations. TPS2062DGN is used in the device and we need IEC…
Part Number: TPS2062C Other Parts Discussed in Thread: TPS2062 Hi Team,
Could you tell me the differences between TPS2062 and TPS2062C?
Regards,
Takashi Onawa
Part Number: TPS2062 we need for the certification of our devices that the IC "TPS2062" complies with the test specified in the standard according to IEC 60950-1, Appendix CC (or UL 60950-1, Appendix CC) for USB interfaces. Is the module certified…
For TUSB4020BI, when PWRPOL is low, it's active high .but TPS2062 is active low to enable the vbus switch.
Also MCP2021 VDD need 5v supply?
Regards
Brian
Part Number: TPS2062 Hello,
I have a couple of quick questions in regard to TPS2062 device. I'm using only one channel of this device to power a USB 3.0 connector. This device will be located on the I/O board close to the USB 3.0 connector in a SFF chassis…