Hi Sahal,
Thanks for reaching out.
Is the digital power monitoring feature mandatory?
TPS2483 is auto-retry variant. Please fill out the design calculator and share with us for review.
www.ti.com/.../TPS2480-81-90-91-92-93_CALC
I'd recommend not to disable the power limit. Please add Cg and Rg as shown below.
Please fill out the design calculator and share it for review.
www.ti.com/.../TPS2480-81-90-91-92-93_CALC
user1077147 said: Currently, Gate dv/dt start-up filter: 1KΩ and 1uF
When switching from Enable to Disable, the current drops and then rises again for some reason.
I think this is the cause of the FET burning out, is that correct?
This is the…
Hi Kenneth,
I will check about TPS1663 and TPS1653 and let you know by today.
Meanwhile, please fill out the design calculators to start with the hot swap design.
LM5069: https://www.ti.com/tool/download/LM5069QUICK-CALC
TPS2490: https://www.ti…
Other Parts Discussed in Thread: TPS2482 , CSD17313Q2 Dear All
Let me ask about "TPS2482's Design-in Calculator".
■TPS2482's Design-in Calculator www.tij.co.jp/.../tps2480-81-90-91-92-93_calc
The FET of the initial setting is "INS540NS".
■About…
SLV033 is a free tool i find in tps2492datasheet , i find the tool link as follows:
http://www.ti.com/tool/tps2480-81-90-91-92-93_calc
but I find no link to download the tool in that page.
Anyone help me?
many thanks !
http://www.ti.com/lit/an/slua500/slua500.pdf describes a 100A, 12V HS.
The large capacitive load will enforce a lot of heating during start up. Keeping the FET(s) cool using heatsinks or fans will probably be required. BTW, there is a design spreadsheet…
Hi sir,
Wen Li said: Are you saying padding data are wrong? they are out of range?
The padding issue is resolved. The border padding values are 0. i.e left, top, right and bottom. The same behaviour is observed for the demo applications. I request…
Hi Melanie,
Mélanie Esteves said: Last question, I want to impement a FFT algorithm with 2048 points. As a result, I did some modifications and implemented thise code : 8625.main.cpp
However, I do not pass the checkParameters funciton. Is there some…
