Part Number: TPS2492 Good morning,
we are investigating about EMI susceptibility of an electronic board developed by us and we are dealing with an issue regarding TPS2492 current sensing.
In particular IMON (pin 6) reading is very noisy after the injection…
Part Number: TPS2492 1. Is TPS2492 in wire bonded package?
2. If high electrical current (e.g. 10 amperes or more) goes through any pin on TPS2492 due to component faulty or other failure, will the internal pin connection in TPS2492 be broken and open…
Part Number: TPS2492TPS2492PW is used for hot swap and short-circuit protection, and has problem when starting into short.
Can disuss the design and problem in private?
Thanks.
Part Number: TPS2492 Other Parts Discussed in Thread: TPS1663 For a customer we are using the TPS2492PWR on a 'smart fuse' application. The application works fine for 99%. We did a test on 24V with a short-circuit (0R1) on the output.
We noticed…
Part Number: TPS2492 Other Parts Discussed in Thread: LM7480-Q1 , LM74910-Q1 Hi,
Good Day.
It is possible to use the TPS2492 as a two-way key. The idea is to use Vin as a Solar panel and Vout as a battery, and Vin can get smaller than Vout.
Please advise…
Part Number: TPS2492 Other Parts Discussed in Thread: TPS2490 Hi expert.
I have tried to design schematic using TPS2492 with some configure as bellow:
- Normal Voltage: 24VDC
- Maximum: 27 VDC
- Overvolt Threshold: 28VDC
- Undervolt Threshold…
Part Number: TPS2492 Hi Rakesh, Is their any news on this topic? We will have some new designs with the TPS2492 coming up, where intensive simulation is required. Thanks in advance, Konstantin
Part Number: TPS2492 Good morning,
i'm experimenting with TPS2492.
I need to know if the current highlighted in figure is approximately stable or have a variability basing on the different PN?
if this signal has been characterized it is possible to…