Part Number: TPS2559-Q1 Other Parts Discussed in Thread: TPS2556-Q1 , TPS2557-Q1 Hi team
My customer asked that if we have the similar function current limit switch like MPS device MP5000A, here is the datasheet of it below:
MP5000A-1384322.pdf
…
Part Number: TPS2559 Other Parts Discussed in Thread: TPS2557 , TPS25221 Dear Team,
The customer is interested in TPS2559, do we have a more competitive device to replace TPS2559?
Do you have a comparison table to compare TPS2559 and TPS2557, appreciated…
Part Number: TPS2559 Hi all,
My customer need UL/CB report about TPS2559 for their U3 hub product MP requirement. Would you please helping to provide that to me? Thank you very much.
Best regards,
Gary Teng
gary.teng@arrowasia.com
Part Number: TPS2559 Hey guys,
Switch does not turn on, when enable pin goes high. I tried 3 different boards.
Design is similar to application in datasheet, figure 19.
Enable and fault are connected together to get auto-retry functionality. Series…
Hi, Yang,
Sorry for late reply.
Below is my bench test waveform, Vout is output of TPS2559, VD is drain of Mosfet(I used CSD16403), Iout is output current. My bench is TPS2559EVM+1ohm Power resistor + CSD16403. The TPS2559 setting is same as yours…
Part Number: TPS2559 Hi, Could you tell me about short circuit shutoff. Customer wants to delay the time of short circuit shutoff. Is there a way to delay short circuit shutoff? (For example, adding a capacitor to the ILIM pin.) Please tell me how to…
Part Number: TPS2559-Q1 Other Parts Discussed in Thread: TPS2561A-Q1 , TPS2559 , TPS2561 Hello,
At the top of the datasheet, it lists the chip has reverse current blocking when disabled. It does not have any mention elsewhere in the document and I would…
Part Number: TPS2559 Other Parts Discussed in Thread: TPS2553 , TPS25221 Dear Team,
The datasheet specify for temperature ranges w.r.t storage and junction temperature only for TPS2559; pls update on the operated (board/ambient values) temperature range…
Part Number: TPS2559 HI team，
TPS 2559 have the function of reverse current cutoff according to it's data sheet. However, in the TPS 25221 's datasheet it is described as "Reverse Current Blocking (when disabled)", this makes me confused.
The structures…
Other Parts Discussed in Thread: TPS2559 Dear Sir
As I know TPS25942 have "I(LIMIT) with Thermal Shutdown" function
Does TPS2559 have the same function ??
Thanks
