Part Number: TPS5410-Q1 Other Parts Discussed in Thread: LMR66410-Q1 Hi,
In the app note SLVA237C , the compensation loop is modified in case ceramic capacitors (very low ESR) are used. My question is: In case the inductor already provides high ESR (chip…
Part Number: TPS5410-Q1 Hi Team,
Customer wants to use TPS5410QDRQ1 as alternative for TPS5410DR due to current situation.
Could you give me comment on following customer questions?
1. Are there any differences between TPS5410DR and TPS5410QDRQ1in terms…
Part Number: TPS5410-Q1 Hello ,
I am currently using TPS5410-Q1 on a PCB , My objective is to get a variable DC-DC Conversion with an input of 24V to an output that varies between 7 to 17V , I added a Digital Potentiometer (U5) instead of the bottom resistor…
Part Number: TPS5410-Q1 Other Parts Discussed in Thread: TPS5410
Q1) What is the approximate open load ENA voltage when VIN is 13.5V?
Q2) Do I need a diode from ENA to VIN to protect ENA pin (from 100uF cap on the pin) if VIN drops suddenly?
Q3) Is slow…
Part Number: TPS5410-Q1 This circuit attached is conducting 100MHz noise back onto the power input line. Attached is the circuit and the radiated EMC trace. 676750 Rev C_Logic0.pdf
Part Number: TPS5410-Q1 Other Parts Discussed in Thread: TPS5410 I am doing a redesign for a production ECU to replace obsolete parts and I chose the TI TPS-5410 regulator to save complexity and reduce some of the switching noise on the prior design. However…
Part Number: TPS5410-EP Other Parts Discussed in Thread: TPS5410-Q1 , TPS5410
Hello,
I was going through the thermal calculations and I noticed that the Quiescent Current Loss formula doesn't seem right. I believe it needs the quiescent current added…
Other Parts Discussed in Thread: TPS5410-Q1 , TPS5430-Q1 , TPS5420 , TPS5410 , TPS5430 , TPS5420-Q1 Hello,
I am having trouble with the TPS5410-Q1 not starting with a load applied. Please see the description below.
Thank you in advance for your help.
Schematic…
Hey Harri,
Thanks for your reply.
The schematic shows TPS5410-Q1 instead of TPS5420-Q1, please confirm which is being used.
-- Actually we designed for TPS5410-Q1 because of the chip shortage currently we are using TPS5420-Q1.
If the part is being damaged…
Hi Peter,
Thank you for your support using Ti's WEBENCH tool.
Q1. The library script error is caused by the non-matching pin count of the symbol to footprint pin mapping. In most cases, it's not an issue as long as the library is generated and the…
