Ramgopal,
Your assessment of the bulk decoupling required is correct. You must calculate the required amount and validate it. The Hardware Design Guide (SPRABI2) discusses this calculation.
This bulk capacitance will affect the control loop on the power…
SI,
Please see the attached presentation. It was originally prepared for the LM10010 which was later superceded by the LM10011 which has higher precision. Please also see the many E2E posts discussing the LM10011 and TPS56121 with C667x and C665x.
To…
Part Number: TMS320C6416 i got a power supply issue of TMS320C6416.I was not able to get the powersupply to ICs so i have changed the ICs .Now i am getting the powersupply but it is getting off and on itself.i am observing this issue by looking at LEDs…
Tat is requiring a minimum of 3.3 square inches of copper area connected to the exposed powerpad under the device. For pest results, that copper should be on teh back side and conneted to the powerpad area on the top side with thermal vias. BTW, you keep…
