Part Number: TPS54356 Hey,
We setup our circuit based on the datasheet and the output of the TPS54356PWPR is undervolted. Supposed to get 3.3V but getting 2.8V.
I tried to adjust the switching frequency to 695KHz, 500KHz, and 400KHz but I haven't…
Other Parts Discussed in Thread: TPS54356 This is Yasar, from Inforce Computing India Pvt Ltd, Cochin.
I have a query related to MPN#TPS54356PWPR and is as follows.
We are using the part TPS54356 in one of our project.
Currently we are using…
Other Parts Discussed in Thread: TPS54352 , TPS54356 Hello,
We're working with the TPS54356 (12V to 3.3V@3A) and the TPS54352 (12V to 1.2V@2.3A). I understand the EVM calls for the Si4888DY FET but I wanted to know if there would be any repercussions…
The Linux version is Ubuntu 14.04 LTS.
The PMIC INT signal is an output from pin 45 of the TPS65217C PMIC to pin B18 of the AM3358 with an external 100 kOhm pull-up resistor to 3.3V, which should be identical in configuration to the Beagle Bone Black…
Other Parts Discussed in Thread: TPS54356 , TPS54325 , TPS54326 , TPS54320 Dear Anthony,
Thanks for your reply.
I have a project with MCU( rm48l950 ) and Fpga (xc3s100e). So I need 1.2v,2.5v and 3.3v supply. I have designed 3.3v 3A by TPS54356 …
Dear Anthony ,
I have a question about it. Could I shut down the 12v output by setup a start/stop voltage at 12.5v?
Whether the power good pin can direct drive a LED indicator?
Best Regards,
Dison
