Search tips
Showing 44 results View by: Thread Post Sort by

  • TPS61232: TPS61232 PSpice Model Won’t Reach 5 V — Output Stalls at ~3.2 V

    Other Parts Discussed in Thread: TPS61232 , TPS61230 Hello TI Support Team, I’m evaluating the TPS61232 boost converter using the official PSpice macromodel package. Download & Setup • I downloaded the complete “TPS61232_STARTUP-trans” example…

  • TPS61232: Design and Gerber for review

    Part Number: TPS61232 Tool/software: Hello TI team, We are using some TI ICs in our design. The Designator and its part numbers are as below, 1. U5: TPS61232DRCR As we have completed the the schematic and layout we would like to review it from TI…

  • TPS61232: The TPS61232 is simulated with TI's Webench Power Designer and the capacitor ESR is mentioned as 1mOhm for C0402C106M9PAC7411 part but in ESR vs Freq graph the lowest ESR is 2.71mohm, so how the part is selected?

    TI Thinks Resolved
    Part Number: TPS61232 I am currently using the Ti Webench Simulator to simulate the TPS61232 boost converter IC. The simulation involves a configuration with an input ranging from 2.5V to 4V and an output of 5V with a current of 1.5A. The specified…
    • Answered

  • TPS61232: 5V input

    Resolved
    Part Number: TPS61232 Other Parts Discussed in Thread: TPS61230 Hi support team, The TPS61232 has a fixed 5V output. Does it work even with 5V input? The input source is a 5V battery. If it works, is it due to "Zero Duty Cycle Mode"? Regards, Dice…
    • Resolved
    • Answered

  • TPS61232: TPS61232 Output voltage is not 5v

    Resolved
    Part Number: TPS61232 Hello, I'm using TPS61232 to get fixed 5v. I'm using exactly same circuit in datasheet except PG. I left PG floating. My input is 3.8v and 310mA. I expected to have 5v but I'm getting just 3.5v. I'm measuring Vout…
    • Resolved

  • TPS61232: TPS61232DRCR broken

    TI Thinks Resolved
    Part Number: TPS61232 I tried this component with this pcb I tried with 2 pcb. 1 doesn't work it seems disabled 1 The first power on work but i when i put a charge 1A... it broke. Anyone can help me?

  • TPS61232: I am using the part for 5V/5A.

    TI Thinks Resolved
    Part Number: TPS61232 Other Parts Discussed in Thread: TPS61288 , TPS61022 Hi, I am using the boost converter TPS61232DRCR for the input range of 2.5V to 5V and the output is 5V/5A. The Boost output load is Raspberry Pi module. the power estimated is…

  • TPS61232: Vout is 0V when battery is used for supply

    TI Thinks Resolved
    Part Number: TPS61232 Hi team, I would like to get your assistance regarding our customer issue with their design using TPS61232. Using a regular power supply, the Vout is 5V. But using a Li-Ion battery with 4V input, the Vout is 0V. The current is also…

  • TPS61232: TPS61232

    Part Number: TPS61232 I'm considering using the EN and perhaps the HYS pins to implement a battery low voltage cutoff. I cannot find the typical currents for those pins or the maximum values for the under voltage lockout resistors. They are critical as…

  • TPS61232: NEED TO KNOW OUTPUT CURRENT

    TI Thinks Resolved
    Part Number: TPS61232 Other Parts Discussed in Thread: TPS61022 Hello iam using TPS61232DRCR in one of my projects. In the datasheet it shows "3.3-V to 5-V Power Conversion with 2.1-A Output Current". Also datasheet shows "TPS6123x High Efficiency Synchronous…

Didn't find what you are looking for? Post a new question.