Search tips
Showing 17 results View by: Thread Post Sort by
    Answered

  • TPS61325: Super cap Charging Time

    Resolved
    Part Number: TPS61325 Hello team, Is there a way to estimate the super cap charging time with the TPS61325? I see figures 77-79 that show cap charging behavior for the specific example, but still it is not mentioned what size supercap has been used…
    • Resolved

  • TPS61325 / 4A output

    Other Parts Discussed in Thread: TPS61325 , TCA9517 Hello, Our customer serching 4A/ch * 2ch LED flash driver with Super Cap. I can't find the device of 4A/ch * 2ch. Then, I think that the TPS61325 and TPS6130x series can be used 4A output current…
    • Answered

  • TPS61325 / precharge current control

    Resolved
    Other Parts Discussed in Thread: TPS61325 Hello, I would like to know about TPS61325 pre-charge function. (1) I think that pre-charge current meaning charge current from Battery to SUPER CAP. And pre-charge current range is 80mA ~ 220mA in…
    • Resolved

  • RE: A few questions related to TPS61325...

    Updating this thread to convey what was explained via email: Q1) Table 2 refers to the power stage inductor valley-current limit (e.g. Ivalley set to 30mA, 250mA meaning the DC input current is limited to a value roughly 100 to 150mA above theses thresholds…
    • Answered

  • RE: LM3644:

    Resolved
    Hi ， What' s your mean about 2A, 2A for each channel? You can check TPS61300/1 or TPS61325 or LM3550. Regards Sean

  • RE: ducati DCC files

    Hi Mayank, Yes I have below changes with respect to sensor. 1. Socket is 0 for where as it is socket 1/2 for ov5650 on blaze board. 2. I2c bus is 2 which is same as one of 5650 on blaze board. 3. TPS61325 flash is not present in our case. 4…

  • RE: TPS61310 Super capacitor

    I get a presentation, and writen in the this answer. BTW, Do you have TPS6130x or TPS61325 EVM? PAN-W
    • Answered

  • Blaze tablet 2 camera kit interface

    Resolved
    Other Parts Discussed in Thread: TPS61325 , SYSBIOS Hi, I am trying to enable camera in blaze tablet 2 which runs ICS 4A.1.4 release.I am using TEVM4XXX-CAM-V1-0 camera kit and connected it to Camera 1 (HDMI style) conector in the tablet.I opened the…
    • Resolved
    • Answered

  • OMAP4470 ov5640 on ducati

    Resolved
    Other Parts Discussed in Thread: TPS61325 omap 4470 I/O: PWR_ON_CAM1/GPIO174 PD_CAM1/GPIO55 RESET_CAM1/GPIO50 FREF_CLK1_OUT/CLK_CAM kernel initial configuration for ov5640: omap_mux_init_signal("unipro_ty1.gpio_174", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);…
    • Resolved
    • Answered

  • OV5640 Camera Issue on custom board

    Resolved
    Other Parts Discussed in Thread: 4460 Hi We are developing a custom board to use OV5640 camera module. On this board we run android 4AI.1.4 release. Now camera can't work, CameraHal can't find camera. I attach the ducati log in the post. Logcat's output…
    • Resolved

Didn't find what you are looking for? Post a new question.