Part Number: TPS65101 We are using the TPS65101 for generation of LCD bias voltages. We initially noticed a few parts that were running very hot, and would sometimes go into thermal shutdown. The IC would still generate the correct bias voltages, at least…
Part Number: TPS65101 Other Parts Discussed in Thread: TPS65140 , TPS65141 , Hi,
My customer meet an issue about VGH and VCOM no output,
Would you please help check below schematic have anything wrong.
AVDD: 9.89 ~ 10.5V
VGH: 19.4 ~ 20.6V
VGL: -10.3 ~ -9…
Part Number: TPS65101 Hi
we bought TPS65101PWP from mouser, the D/C:1816, and now the solderability test failed which cannot use on our product.
we contact mouser that need RTV,but mouser said that need we to contact directly :
The supplier offers the…
Part Number: TPS65101 Hi,
I have a focus customer in Atlanta Georgia that is looking for the PSPICE model for a TPS65101.
Any chance we have that in the back room somewhere?
Thanks,
Blake
Part Number: TPS65101 We're using the identical circuit as in Figure 19 of the datasheet, except with different voltage values. Our circuit also has VGH configured in "tripler mode" with the flying cap at 0.22uF. The VGH output voltage is…
Part Number: TPS65100 Other Parts Discussed in Thread: TPS65101 I needed to replace a TPS65101 on a prototype by a TPS65100. The TPS65100 was originally intended to be used, however due to bad availability we had the TPS65101 assembled instead.
The outputs…
Other Parts Discussed in Thread: TPS65101 Hello,
I'm designing a LCD driver with TPS65101. Below is the SCH. ENR is pulled low and inductor is 4.7uH
When the LCD screen is not connected (no load), the SW1/SW2 waveform is as below shows. It looks abnormal…
Hello,
Devices that are functionally similar to TPS65100 are TPS65101/105 and TPS65140. For other devices on your list, I will assign this thread to appropriate product line within TI and one of the engineers will respond to you directly.
Kind Regards…
Part Number: SN65DSI83 Other Parts Discussed in Thread: TXB0108 , TPS65101 , DSI-TUNER Hi,
I am new on this forum, I used to work directly with an application engineer in the past employment but can't seem to be able to reach any of my old contact. Anyhow…