Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: TPS652353 Tool/software: Hi
Looking at Datasheet, the min value of tfcl,tfda is 20 ns.
The manufactured board measures tFCL = 1.5ns and tFDA = 2.5ns. Is there something wrong? Or am I wrong with the data sheet?
-Condition-
CB=0
Ch1:SDA(Yellow…
Part Number: TPS652353 Tool/software: Hi,
The datasheet for the TPS652353 says the following:
Here, are we talking about protecting the IC or protecting the LNB ?
We have a system where the LNBs are frequently getting faulty.
We are trying to identify…
Part Number: TPS652353 Dear All
Is possible to use the DIN and DOUT (demodulation of external 22KHz tone) when Vlnb out is disable ?
If I set BIT3 in CR2, on pin DIN I have around 2.5V and the 22Khz tone from external source (a receiiver, i.e.)
If I clear…
Part Number: TPS652353 Other Parts Discussed in Thread: TPS65235-1 Hi team,
The customer used TPS652353 setting ISET to 110kohm for 1A current limit. And hiccup ON time set to 58 ms and OFF time set to 466 ms.
But they found the abnormal protection function…
Part Number: TPS652353
Hi,
I am using TPS652353 in my design and using I2C to control it.
It works fine for setting voltage levels, I am using 13.4V and 18.2V which work fine.
But. when I try to disable the output by writing 0x00 in Control 2 register…
Part Number: TPS652353 Hi,
i need just a small clarification.
TPS652353 LNB regulator IC supports maximum current output of 1A.
Is there a standard which tells LNBs to limit the current requirement within this limit?
Part Number: TPS652353
Hi,
I had earlier requested a design review here for my TPS652353 design.
Now my board has arrived and I wanted to check the output voltage by setting it through I2C.
My input voltage is 5 Volts, I have connected VCC and VIN pins…
