Part Number: TPS65919-Q1 Other Parts Discussed in Thread: TPS65916 Hello Experts, Can TPS65919-Q1 and TPS65916 use same PCB layout if it does not use LDO3/SMPS5 ? In other word, TPS65919-Q1 and TPS65916 are drop in replace (software compatible) as long as…
Part Number: TPS65919-Q1 Hello Guys,
Our customer is using O919A152TRGZRQ1 in automotive ECU application. The output voltage of SMPS1 is 0.8V. They would like to know how much maximum current they can draw from SMPS1 with 0.8V voltage output…
Part Number: TPS65919-Q1 Other Parts Discussed in Thread: TDA2E Our AVM controller uses TPS65919 and TDA2e(17*17)，the sequence of the PowerOn is BAT -> UG5V -> UG3V3-> MCU Reset ->PMIC_HOLD(PMIC is enabled).
Our problem is the output of the…
Part Number: TDA3MV Other Parts Discussed in Thread: LP8733 Hi,
I'd like to check the compatible PMIC of TDA3MVSBFABFQ1 for automotive DMS application. Could you recommend a PMIC like TPS65919-Q1 (O919A152TRGZRQ1) for TDA3MVSBFABFQ1?
To estimate temperature, I recommend checking out the "TPS65917 Power Estimation Tool (Rev.A)" in the technical documents section of the device portfolio: http://www.ti.com/product/TPS65919-Q1/technicaldocuments
This spreadsheet works…
Part Number: TPS65919-Q1 Dear,
our client design DRA711, PMIC was use TPS65919-Q1,
PMIC LDO1 output default was 1.8V, but we need change to 3.3v, how to do revise register? or TI Factory Settings ?
IF any suggestion, Please advise me.
Part Number: TPS65919-Q1 Hi.
O919A152TRGZxQ1: Did something change in OTP=0x52 since last time?
User's Guide says that Powehold UP waiting time is 8sec.
The previous chips (bought by me in spring 2018) wait for 8secs.
Recently bought chips (fall of…
Part Number: TPS65919-Q1 Hello guys,
One of my customers is considering using TPS64919-Q1 for their next products.
The customer found the device had three parts numbers as O919A14C, O919A14E and O919A152.
What is difference between O919A14C, O919A14E…
Part Number: TPS65919-Q1 Hi,
We are using TPS65919-Q1 in our project. We have to calibrate ADC channels.
I go through the slia087a.pdf document for ADC calibration which is available in attachment.
In this I have some doubt ,
1) Initially GPADC_TRIM1 …