Hi,
You can use the AM572x GP EVM schematics as a reference. Codec interface is on p.16 of the processor board schematics. I'm attaching the file for your convenience:
8484.TI_AM572XEVM_REV_A3a.pdf
0160.sprr212.pdf 3107.CPU_Schematic.pdf Hi Rishabh,
Please find the attached schematic and layout.
In schematic U6 NAND IC present in out EVM.
Could you please confirm,whether we are referring correct schemtic and Source code?
Regards,
Sankar…
sprr212.pdf CPU_Schematic.pdf Hi Shravan,
Thanks for reply.
Please find the attached schematic and layout.
In schematic U6 NAND IC present in out EVM.
Could you please confirm,whether we are referring correct schematic and Source code?
Regards…
Part Number: AM5708 Other Parts Discussed in Thread: AM5728 Hi:
I have a custom AM5708 based board with SDK6.02 Linux RT.
The board has 3 ethernet interfaces:
- eth0: connected to GMAC
- eth1: connected to prueth pruss2_eth
- eth2: connected…
Other Parts Discussed in Thread: AM5726 , TPS51200 Hi Team,
My customer is evaluating our AM5726 in field relay protection project. This project may potential be the high-voltage platform in future, so it’s important to us. Here comes a question about…
Hi Srinivas,
On the TPS6590376, the output REGEN1 in conjunction with a TPS22965 load-switch can be used to properly power sequence the VDDSHVx domains. It assumes a 3.3V regulator is already on and the REGEN1 output enables the load-switch to power…
Other Parts Discussed in Thread: AM5728 , TPS54531 , TPS659037 , TPS22965 , TPS54320 , TPS54620 Hi
My customer will use AM5728.
This devise's 3.3V power requires ±2% voltage accuracy.
In reference design of it, it uses TPS54531.
But I read the…
Fullscreen
8400.app_log.txt
Download
mmc0 is current device
SD/MMC found on device 0
reading boot.scr
381 bytes read in 3 ms (124 KiB/s)
Running bootscript from mmc0 ...
## Executing script at 82000000
Partition Map for MMC device 0 -- Partition…
Hi Stefan,
Can you update your MLO, u-boot.img and uenv.txt in the boot partition of the SD-card and see if the kernel boots?
To update the config can you run the below steps?
Add the below lines to ti_config_fragments/auto.cfg (present in the kernel…
