Part Number: TRS232E We replaced the obsolete LMS202ECM/NOPB devices on our BOM a while back with the TRS232ECD/ECDR/EID/EIDR.
We have been having some intermittent issues connecting to our RS-232 port at 9600baud.
Just noticed on the datasheet that the…
Part Number: TRS232E Hi team,
My customer wants to TRS232E in the system. We have two questions want to check with you.
1. We put 4 resistor at MCU side Rout and Din, we want to calculate the power consumption of the resistor. Do you have some ideas how to c…
Part Number: TRS232E Other Parts Discussed in Thread: MAX202 , , TRS232 Hi Tiers
i use the max202 in my project, but it shouldn't be the optimal solution,
Can the TRS232/TRS232E replace the MAX202?
Is there any other P/N recommended, need Pin to Pin
Other Parts Discussed in Thread: TRS232E Hi all. I have questions about TRS232E, but the information which I have is my customer's confidential. So I would like to contact to RS232 application engineer by private message Please give me your response to…
Part Number: SN65C23243 Other Parts Discussed in Thread: TRS232E Hi,
Currently, my customer is using SN65C23243.
But now, the input voltage is required up to 30V, is there any other suggested solution from TI?
Currently, we found TRS232E could have abs…
Other Parts Discussed in Thread: TRS232E , MAX232 I have an embedded device that uses RS-232 to communicate with a PC. We recently switched over to using the TRS232E from the Maxim MAX232 chip. I noticed that if I connect the device to a teminial program…
TRS3223-Q1 unloaded DOUT is nearly the same as loaded because the charge pump is regulated.
The TRS202 and TRS232E have higher DOUT because the 5V charge pump is unregulated for close to double voltage.
Other than that the 3 supply pin device…