Part Number: TRS3122E Hi,
Is it possible to connect the INVALID output to FORCEON while FORCEOFF is high, to allow auto-powerdown when no cable is connected?
Thanks,
Scott
Part Number: TRS3122E I tested ESD test for our equipment includes TRS3122ERGER. ESD test condition is IEC61000-4-2 / contact +8kV. As a result of, failure occurs in DOUT1 pin of TRS3122ERGER. But TRS3122ERGER datasheet denotes this device accept ESD…
Part Number: TRS3122E Hi
The TRS3122E datasheet states in absolute maximum rating section that FORCEOFF# may go from -0.3 to +6V, recommended is maximum VL. What happens if both power supplies VL and VCC of the TRS3122E are down but there is a pullup resistor…
Part Number: TRS3122E Hello. are sources series resistors recommended on the DIN and ROUT interfaces? If so, could a recommended resistor value be provided? Thanks!
Part Number: TRS3122E Other Parts Discussed in Thread: TXB0104 , TXU0204 , TRSF3223E , TXU0304 , TRS3227E , MAX3227E ,
Our requirement is to have a 232 transceiver with a 1.2V logic level of FPGA bank operating at 921.6 Kbps. As we could not find any such component…
Part Number: TRS3122E Hello,
Figure 13 shows DOUT2 (PCB1) connected to DOUT2 (PCB2), and the rest of the signals connected likewise. Isn't this a mistake, connecting two outputs together?
Regards,
Scott
Part Number: TRS3122E Dear Teams,
I would like to use this product for an FDA Class II medical equipment. It is not a life-critical medical equipment. Do I need a special permit to use the parts? Please let me know if there are any restrictions such as…
Part Number: TRS3122E Hi,
Could anyone help to provide the information regarding the current consumption performance under Static and Off mode?
The datasheet shows the number of it but our TEST CONDITIONS are different, e.g. the /FORCEOFF and the FORCEON…
Part Number: TRS3122E Dear Teams,
My customer is evaluating our TRS3122E. Could you help resolve my customer questions?
Do we have any technical document or draft report to explain how to select the C1/C2/C3/C4/C5 excpet these information showing in…