Enzo,
The TS12A44513 is not a mechanical switch so there are not any physically moving parts that will contact pads. The devices is a solid state switch and the terms normally closed and normally open are borrowed from the mechanical switches but are…
Part Number: TS12A44513 Hello Team,
Do we have a 40V equivalent of this device TS12A44513?
One of my customer is looking for alternates for DG445DY. Signal level through the device will be <40V and supply voltage to device is 5V.\
Regards,
Mahendra …
Part Number: TS12A44513 Other Parts Discussed in Thread: TS12A44515 , SN74HC4066 Hey Team,
I was hoping you could help me with a quick question.
So I am looking at our: TS12A4451x device and comparing it to the competitor: 74LVC4066PW
And the cross reference…
Other Parts Discussed in Thread: TS12A12511 Hi
When powered off 11V and 0V, then does a small negative input voltage of a couple of mV on an i/p mean that we should use a negative supply rail instead of 0V?
Regards
Hi Ishiwata,
The TS12A4451x (TS12A44513/4/5) share the same function table you shared above. When "IN" is Low, NC TO COM or COM TO NC is enabled and when "IN" is High, NO TO COM or COM TO NO path is enabled.
The main difference is the…
Jack,
If you are looking at isolating in a DC sense than you can look at the off state leakage current. Using the TI.com switch selection tool I have found TS12A44513 that specifies low off-state leakage current.
Thank you,
Adam
Victor,
I didn't see that information in the CD74HCT4066 or CD74HCT4066 datasheet.
Another way the crosstalk from the digital control pin is specified as charge injection. TS12A44513 looks like a device above that has low charge injection.
Thank…
Hello Adam,
I found this switch TS12A44513 which I really need but the problem with that is the Package Group comes only on SOIC and TSSOP and what I need is PDIP or CDIP so it can fits my bread board. So if there is any switch with the same specifications…
32-bit devices (SN74CBT34X245/SN74CBT32245/SN74CB3Q32245/SN74CBTK32245) have OEs for four 8-bit groups. Smaller devices (24…8 bits) have no more than two groups.
To get OEs for all channels, you need to go down to 4 bits: SN74CBT3125, TS12A44513…
Christoph,
What do you mean by "normally closed" ? Solid state switch will either be ON creating a low impedance path or OFF creating a high impedance path? All of our switches are either ON or OFF based on a logic high or logic low on the control…