Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.



Search tips
Showing 86 results View by: Thread Post Sort by

  • TS3USB30E: TS3USB30E: Confusing information about power supply should follow USB standards

    TI Thinks Resolved
    Part Number: TS3USB30E Hi, looking at the corresponding datasheet there is a confusing information: It says: "Power to the device is supplied through the VCC pin and should follow the USB1.0, 1.1, and 2.0 standards." As I understand the 5V of…

  • TS3USB30E: switch for 75mhz with AC behavior

    TI Thinks Resolved
    Part Number: TS3USB30E Experts, can I use this device as SPDT operation where Ron<10ohms, Cin<2pf, Fsw=75Mhz and ac effect overshoot and undershoot is passed thru switch with high fidelity. thanks

  • TS3USB30E: Could you please provide the IBIS model for TS3USB30E?

    TI Thinks Resolved
    Part Number: TS3USB30E Hi Sir, As the title, could you please provide the IBIS model for TS3USB30E? Thanks, George
    • Answered

  • TS3USB30: decoupling capacitor values?

    Resolved
    Part Number: TS3USB30 Hi, I'm using TS3USB30 in a new design. The datasheet doesn't list the recommended value for the decoupling capacitor– what should the value of the decoupling capacitor be? Will 0.1 uF work? -adam -- Adam Feuer Starcat…
    • Resolved
    • Answered

  • TS3USB30E: Did we have the p2p solution to replace the TS3USB30E and got better IL and performance?

    Resolved
    Part Number: TS3USB30E Other Parts Discussed in Thread: TS3USB3000 Hi Sir, Our customer have designed TS3USB30E for their system U2 port, but they got the fail on eye diagram testing. After they remove TS3USB30E then they got positive result and eye…
    • Resolved

  • TS3USB30E: For I2C application

    TI Thinks Resolved
    Part Number: TS3USB30E Other Parts Discussed in Thread: TCA9543A Hi, Is TS3USB30E suitable used on I2C interface? My customer have two I2C host want control one I2C slave, can use TS3USB30E in this condition? Thanks! Jeff
    • Answered

  • TS3USB30: D+/D- impedance when chip in disable status

    Resolved
    Part Number: TS3USB30 Hi Team, My customer would like to know the actual impedance of D+/D- pins when device is in disable status(OE=H). The datasheet just shows the signal paths in high impedance. Thanks a lot. Vincent Chen
    • Resolved

  • TS3USB30: Soldering profile

    Part Number: TS3USB30 Hello E2E, Do we have soldering profile suggestion like the picture below? ~Jason
    • Answered

  • TS3USB30E: Did we have the S parameters for TS3USB30E?

    Resolved
    Part Number: TS3USB30E Hi Sir, Did we have the S parameters for TS3USB30E? Customer is requesting this data for the simulation. BTW, did you know what meaning of NC/NO on our eye diagram in datasheet? Thanks, George …
    • Resolved

  • TS3USB30: Please review the schematic for overvoltage protection

    TI Thinks Resolved
    Part Number: TS3USB30 Other Parts Discussed in Thread: TS5USBC402 Hi all, We designed TS3USB30 IC for overvoltage protection. the concept is below; \OE pin is low : normal operation. S pin is controlled by USB_SEL from MCU. \OE pin is high : overvoltage…

Didn't find what you are looking for? Post a new question.