• 

  Dennis Oh

  • 4 months ago
  • Interface
  • Interface forum

  TS3USB3000: what is the OVP threshold for D+/- short protection from VBUS?

  TI Thinks Resolved

  Part Number: TS3USB3000 Hello, [8.3.2 Overvoltage Protection When 9-V Short to D+/– Pin] in the datasheet, but, we don't have its working threshold in the electrical table. what is the OVP threshold for working? and what is the hysteresis...
• 

  Frederik Baars

  • 7 months ago
  • Interface
  • Interface forum

  TS3USB3000: swap the D+ and D- pins

  TI Thinks Resolved

  Part Number: TS3USB3000 Hi, is it allowed to swap the D+ and D- pins on TS3USB3000 to simplify the PCB layout? There is no specific mention of any polarity-specific internal circuitry in the datasheet. Thanks Fred
• 

  Ansel Song

  • 7 months ago
  • Interface
  • Interface forum

  TS3USB3000: Schematic review

  • Resolved

  Part Number: TS3USB3000 Hi Team， Could you help to review the below schematic? In order to simplify
• 

  Brian Zhou

  • 3 months ago
  • Interface
  • Interface forum

  RE: TS3USB30E: Did we have the p2p solution to replace the TS3USB30E and got better IL and performance?

  TS3USB3000 has much higher bandwidth than TS3USB30E, that means it has less loss than TS3USB30E
• 

  user021864

  • over 1 year ago
  • Interface
  • Interface forum

  TS3USB3000: limitation between VCC and I/O level

  TI Thinks Resolved

  Part Number: TS3USB3000 Hi, My customer is having below question: As the datasheet describe all I/O pins to be in high-impedance mode when power is OFF, but how about the I/O pins state when VCC level is 0V~2.7V If any limitation between VCC...
• 

  Brian Zhou

  • 2 months ago
  • Interface
  • Interface forum

  RE: TS3USB221: Asking for the TS3USB221 design suggestion

  since you are cascading two MUXes,, it's better to use TS3USB3000, it has much higher bandwidth.
• 

  T Kishi

  • over 1 year ago
  • Interface
  • Interface forum

  TS3USB3000: Leak current from USB +/-

  • Resolved

  Part Number: TS3USB3000 Hi My customer has question. The data sheet describes the leak current from
• 

  Patrik Wey

  • over 1 year ago
  • Interface
  • Interface forum

  TS3USB3000: TS3USB3000 for 2 USB2.0 devices

  TI Thinks Resolved

  Part Number: TS3USB3000 Hi I need to connect 2 USB High speed devices to my MCU with only 1 USB High speed host. Because I only need 1 Device at a time, I simply like to switch between the the to devices. Can I do this with the TS3USB3000 and use the...
• 

  user4555336

  • over 1 year ago
  • Interface
  • Interface forum

  TS3USB3000MRSER is not detecting USB device

  TI Thinks Resolved

  Part Number: TS3USB3000 HI , We are using TS3USB3000MRSER as MUX for USB and I2C interfaces.We are using MHL lines for USB interface and USB lines for I2C. Now we are facing problems in USB device detection . Checked electrical continuities and is...
• 

  Yuki Saito

  • over 1 year ago
  • Interface
  • Interface forum

  TS3USB3000: Make sure TS3USB3000 datasheet is correct or not.

  • Resolved

  Part Number: TS3USB3000 I have question I have just find KO = 1.75 mm in 21p. Please see the below

Didn't find what you are looking for? Post a new question.

• Ask a new question