Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: TSC2004 Hi, thanks in advanced for any kind of help
Im considering to add the TSC2004 to my design and due is a battery device, consumption is always my bottleneck.
I do not have experience with such controllers and i need it to detect all…
Part Number: TSC2004 Other Parts Discussed in Thread: TSC2007 Hi team, Tsc2004 has the power-down mode. How to set the power-down mode? And,
Does the power-down mode require SNSVDD=I/OVDD=VREF=to be 1.6V or less? What happens when the voltage exceeds 1.6V…
Part Number: TSC2004 Hi Team,
We have received this inquiry from our customer,
The TSC2004EVM-PDK has 0.1uF bypass caps to the ground plane layer for SNSVDD (C8) and IOVDD (C7), and a 10uF for Vref (C6).
The TSC2004 datasheet shows an application circuit…
Part Number: TSC2004 Hi Team, I am using TSC2004IRTJT in one of my projects. The display we are using is 1743 which has a resistive touch screen with analog output. I am planning to use TSC2004IRTJT to convert those analog values to I2C so that my controller…
Part Number: TSC2004 Hi Team, I am using TSC2004IRTJT in one of my projects. The display we are using is 1743 which has a resistive touch screen with analog output. I am planning to use TSC2004IRTJT to convert those analog values to I2C so that my controller…
Hello Hiroshi-san,
No worries and no need to apologize! I am happy to help in any way I can.
Q1: I believe that since the addition of the two X and Y resistances is 1080ohms, then the "0.86<Rts<1.68" should be selected. I am not sure why when the higher…
Part Number: TSC2004 Hello guys,
One of my customers is evaluating TSC2004, a touch screen controller for their new products.
They have several questions as the follows.
Could you please give me your answers or comments?
Q1. Is /PINTDAV pin level set…
Part Number: TSC2004 Hi Team,
Please help me answer the follow question from my customer, thank you so much.
Should I leave the reset pin to low when power up?
Best Regards, Tom Liu
Part Number: TSC2004 We executed the ESD tests by discharging +/-8kV (air discharge) on a 5" TFT display with integrated resistive touch screen.
The touch screen controller was the TSC2004IRTJR, which should be protected up to +/-25kV (air gap),…
