Part Number: TSD05 Tool/software: Hi, We have received additional inquiries from end users, so please let us know. Theoretically, there is no difference between TSD05 (unidirectional) in series and TSD05C (bidirectional), but they are different on the…
Part Number: TSD05 Tool/software: Hello, I have a question regarding the polarity of the diode. Although the datasheet indicates the location of the ID mark, there is no marking on the actual part.
Could you kindly let me know the position of pin 1…
Part Number: TSD05 Tool/software: Hi
When I asked about this before I was told the part was compliant with 61000-4-4 EFT
Has anyone been able to get the datasheet updated to definitively state this please?
https://e2e.ti.com/support/interface-group…
Part Number: TSD05 Other Parts Discussed in Thread: , TVS0500 Tool/software: Hi,
I have a question about how to use and select a TVS.
Target parts: TSD05, TSD05C
Things to check ①. Is it okay to use it for the following purposes?
- Between the…
Part Number: TSD05 Tool/software: Hi
We are looking at TVS Diodes and have short-listed 2 parts for the design
Wurth 824031815 and TI TSD05 Diodes
Both parts look excellent however we note that the TSD05 datasheet lacks a mention of IEC 61000-4…
Part Number: TSD05
Hello E2E Engineers,
I am seeking your expertise to review my PCB layout designed for robust ESD protection in an industrial environment. Below are the details of my configuration:
TVS Diodes : TSD05, placed close (2mm) from…
Other Parts Discussed in Thread: TSD05 Hello E2E team,
Can TSD05 TVS Diode sustain EFT transients of 40/80A?
The Datasheet did not mention EFT specifications, and I would like to confirm from the product team about the EFT.
Part Number: TPD4E001 Other Parts Discussed in Thread: TSD05 , Tool/software: I have decided to use this IC for 4 lines of I2C interface connecting to external LEB board (400khZ).
SDA, SCK, RESET and INT.
Do you see any issue to use it for I2C application…
Part Number: TLV1117LV Other Parts Discussed in Thread: TSD05 Hello E2E Community,
Kindly guide us by reviewing the following layout for TLV1117LV LDO.
2 Layer PCB with 60um Copper Layers & 1.5mm FR4
5V DC Input > TVS (TSD05) > Pi-Filter > TLV1117LV…
Hi Tom,
Thanks for your patience as TI was on holiday yesterday. Overall, I agree with Clemens points :)
Only one diode (one for each line) is needed:
Schottky diodes are not meant for surge or transients, but rather protection against sustained…
