Part Number: TUSB1002 Other Parts Discussed in Thread: , HD3SS3220 Tool/software: Hi,
I am using the TUSB1002 and the HD3SS3220 in a SuperSpeedPlus (10Gbps) application which connects an FPGA via the TUSB1002 and HD3SS3220 to a USB C connector. The attached…
Part Number: TUSB1002 Tool/software: Hi,
Regarding the s-parameter model for the TUSB1002 could you tell me the port mapping of the model. Are the input ports 1 and 2 and the output 3 and 4 for example. Also, could you let me know the equalisation settings…
Part Number: TUSB1002 Other Parts Discussed in Thread: SN65DP159 , TMDS181 , Tool/software: Hi,
Im looking for redriver/retimer to deliver one direction data (video, 4k, 60fps) through long cable (4m).
The driver and the receiver will be probably FPGA.
…
Hi Brian,
Hope you're doing well. Those capacitors need to be 330nF because the USB spec allows 75nF - 265nF of total capacitance on a USB signal line.
When you consider that the transmitter side could have a capacitor around 100nF, you need to add…
Part Number: TUSB1002 Hi Team
do you think TUSB1002 is best replacement for PS8811?
0614-00J0000 PARADE INTERFACE PS8811QFN36GTR2-A2 QFN36.pdf
BRs
Brian
Part Number: TUSB1002 Hi All,
I am considering changing from TUSB1002 to TUSB1002A.
As for the terminals, 14pin is different. The EQ gain and DC gain settings will also change.
I have confirmed the E2E below. The Rx termination has been changed to GND…
Part Number: TUSB1002 Hi team,
The TUSB1002RGET (USB3.1 linear driver) has a symptom of USB disconnection when a quenching agent is used.
In this device, when operated at low temperatures, the following symptoms were observed Degradation of signal waveforms…