Part Number: TUSB1002A Hi team,
we all know AC gain help insertion loss,
but how does DC gain affect or help the "eye diagram" and how should we set this DC gain level base on customer's design?
Part Number: TUSB1002A
Hello,
In a picture of TUSB1002A's VQFN package (RGE) in the data sheet, what appear to be metal exposed outside are seen. I'd like to confirm if these are really metal or not.
Best regards, Shinichi Yokota
Part Number: TUSB1002A
Hi,
I'd like to confirm the value of AC coupling cap for SATA only application. Ii is clear to have the ferrite bead along with 49.9 ohm resistor at between C(TX2) and SATA connector.
For AC coupling capacitor, there are 10nF nearby…
Part Number: TUSB1002A
Hello,
I Designed a usb 3.0 redriver usign TUSB1002A. i used a ESD protection (PN:TPD2EUSB30ADRTR) for the lines SSTX, SSRX, D+-.
My board which i design doesnt work.. do you know why? The difference between my board to the evalutaion…
Part Number: TUSB1002A Hi Experts,
TUSB1002A document mentions an optional pulldown resistor, 220kohm, for RX port for discharging . I would use TUSB1002A with HD3SS3320, Type-C MUX, for Type-C configuration. In this case, should I consider about this…
Part Number: TUSB1002A My customer measure the power consumption in disconnect mode but result is worst.
But they only use the PCIE interface only, the PCIE mode also can follow the Disconnect/U2/U3: < 1.9 mW?
How to check if the TUSB1002A have entry…
Part Number: TUSB1002A Other Parts Discussed in Thread: TUSB1002 , Hello,
I'd like to know about the differences between TUSB1002 and TUSB1002 A . I cannot exactly figure it out from the data sheets. It'd be helpful if a comparison table is available…