Part Number: TUSB1002EVM Other Parts Discussed in Thread: TUSB1002 , TUSB1002A Hello,
I'm running some experiments to check the viability of multiple USB3 interconnections through cables and connectors.
I've started testing with commercial USB3 cables…
Part Number: TUSB1002EVM Other Parts Discussed in Thread: TUSB1002A , TUSB1002 , TUSB216I Hi,
Customer is having a continuous transmission problem in a more than 5m distance.
Customer aims is to transmit USB 3.2 Gen1 over the whole transmission path…
Hello Damodaran,
I would not add resistors to RX1P and RX1N. What is the Newnex repeater module and where is our system in your second setup. Is it between the 1m and 3m cable? If so, you can try to change the jumper settings to see if that makes a…
Thanks for your Reply
I have tried connecting USB3.0 harddisk with and without redriver board (TUSB1002EVM) speed of transfer rate is getting around 124MB/s in both condition refer Fig 1 & 2
Fig-1
Fig-2
If I connect USB3.0 Camera module…
Hello Tikitaka,
Perhaps it is the same incompatibility issue that this post describes. The workaround is to include AC capacitors on the RX differential pair, as described in the post.
Regards,
Diego.
Part Number: TUSB1002EVM Other Parts Discussed in Thread: TUSB1002
We recently bought a TUSB1002 Evalboard and tried to connect a USB3.1/Gen 2 Camera to it.
On connect, it the camera falls back to the USB2 speed/protocol.
We found the hint that…
Part Number: TUSB1002EVM Other Parts Discussed in Thread: TUSB1002 Hi, I used the TUSB1002 EVM with the following setup:
A) PC (type A)-----------USB3_1m------------(type B)EVM(type A)------------USB3_3m------------(micro B)camera ->stream video from…
We using the TUSB1002 (TUSB1002EVM).
The cable lenght between the two TUSB1002EVM is 1.5m.
From Host PC to the first TUSB1002EVM is 1.5m and from Device (HDD) to second TUSB1002EVM is 20cm.
The answer that we need is very urgent!
thanks
Pet…