Part Number: TUSB1064 Other Parts Discussed in Thread: TPS65987D Tool/software: Hello guys,
One of my customers is considering using TUSB1064 for their next products.
At this moment, they have the following questions. Could you please give me your reply…
Hi Michael,
1. Can you probe the AUX lines near the 1064 and check the common mode voltage when your USB/DP source is plugged in? The TUSB1064 requires the common mode voltage on AUXP to be min of 0 and max of 0.4V. The common mode voltage on AUXN is required…
Part Number: TUSB1064 Other Parts Discussed in Thread: STRIKE Tool/software: sun_LEG_MMI_BOARD_L_V00_20240709 - for TI Review.pdf
Hi team,
the attachment are SCH and application block diagram, Could you help to review the SCH design?
BR
Jingguo
Part Number: TUSB1064 Other Parts Discussed in Thread: TPS65983B , TUSB8044 , TPS65982 , , TPS65987DDK , TPS65987DDJ Tool/software: Hello,
My name is Pavel Skoda.
Could you please review my schematic (included) - I posted my Questions on page4 and Page5? …
Part Number: TUSB1064 Other Parts Discussed in Thread: TUSB8044A , , TUSB8044 Tool/software: Hello,
My name is Pavel Skoda.
After very beneficial chat with David, I finished my design of the HUB (USB-C to 2xUSB3x and 1xDisplayPort outputs).
Could you please…
Part Number: TUSB1064 Other Parts Discussed in Thread: TUSB8044 Hi David Liu,
Thank you for the answer!
Unfortunately, the MCDP2900 is obsolete device, so I can not use it for a new design.
It is really unbelievable there are no such devices on the us…
Part Number: TUSB1064 Hi,
I have an Application for Display port and USB port, the USB should work in Device mode(ex: Flashing),at that time The Display Port Should be Active(like both usb & DP work Concurrently)
for this application I have a SOM…
Laszlo
You should place AC coupling capacitors on both the TX and the RX. For TX, you need to use either 100nF or 220nF AC coupling capacitance. For RX, you need to use 330nF AC coupling capacitor. The DC rating of the AC coupling capacitor must be picked…
Part Number: TUSB1064 hi E2E teams
i use TUSB1064 for Type-C to DP&USB in my new project.
1. The input of TUSB1064 from Notebook Type-C,TUSB1064 is configured as USB3.1+2 Lane DP.
2. The DP output of TUSB1064 is connected to DP receiver IC.
my issue…
Part Number: TUSB1064 HI team,
TUSB1064 only has 2 lanes when switching U31 signals. Do we have a newer solution to switch 4 lanes of USB and 4 lanes of DP, which means 4 in 8out?
Thanks
Lillian