Part Number: TUSB212 Tool/software: Hello guys,
One of my customers is doing USB2.0 compliance test using TUSB212RWB with the following connection.
CPU board <-- cable --> Relay board (TUSB212RWB) <-- cable --> DUT
When the TUSB212RWB relay…
Part Number: TUSB212 Dear Support Team,
We are using TUSB212IRWBR USB2.0 Re-driver IC in our design.
Could you please confirm what is the maximum post-channel insertion loss (dB) with 1 meter cable?
Thanks,
Deepika
Part Number: TUSB212 Hi Team,
How can I understand the statement in datasheet 'Supports up to 5m pre-channel or 2m post-channel Cable Length' means the total length from host and device can be 5m+2m = 7m, or it means the total length is 5m?
…
Part Number: TUSB212
Hi, Support Team
We will use TUSB212IRWBR as below chart, have any concern?
if any suggestion, Please advise me.
Thanks,
Best regards,
Lawrence
Part Number: TUSB212 Other Parts Discussed in Thread: TUSB1002A
Dear Team,
Please help provide the SI Model of these two USB Re-drivers for customer run simulation. TUSB212RWBR TUSB1002ARGER
Many Thanks,
Jimmy
Hi Michael,
For the SDA/SCL, our EVM does not have any pull-ups for those pins on the board. Instead, I used an AARDVARK I2C/SPI host adapter which has a 2.2KOhm resistor on each line to pull-up those pins and communicate.
For ENA_HS and EQ, EQ was set…
Part Number: TUSB212 Hi team,
The customers want to know the input signal of TUSB212. Do we have such input standards(for example voltage level ,date rate, frequency, encoding protocol) for input signal while using TUSB212? Or what kind of signal could…
Hi Ryan,
The customer said AC set as 1 and DC as 80mV, the failing board still repots error;
AC set as 1 and DC as 60mV, the failing board recovers;
Ryan Kitto said: By lowering AC Boost down to a lower level, such as level 1, the…
Part Number: TUSB212 Other Parts Discussed in Thread: DXP
Hi expert,
Referring to USB specfication Rev2.0 "7.1.1 USB Driver Characteristics", The USB port can withstand voltages from -1.0 to 4.6V.
In the other hand, Referring to TUSB212 datasheet…