Search tips
Showing 76 results View by: Thread Post Sort by

  • TUSB213: DC boost pin

    TI Thinks Resolved
    Part Number: TUSB213 Hi Expert, Datasheet is descrived as below, What is meaning "(to 3.3V)"? Could you please let me know the detail of this description? In my understanding, this pin should be pulledup to 5V, from Figure 7. Reference…

  • TUSB213: TUSB213 DC boost

    TI Thinks Resolved
    Part Number: TUSB213 Other Parts Discussed in Thread: TUSB217 Hi Sir/Mam, I would like to share with you that i am using TUSB213 as redriver for extending the usb cable length. Currently i have made my own cable where i have 5m prechannel cable then…

  • RE: TUSB213: Problem on cascade of TUSB213

    Hi, What exactly is the failure you are seeing? What is the total trace length from CPU to connector? Where are your TUSB213 placed along the trace? TUSB213 is bi-directional, CPU mode should not impact function of TUSB213.
    • Answered

  • TUSB213: About distortion of first Sync signal at circuit with CMF

    Resolved
    Part Number: TUSB213 Hi Team, Our customer are evaluating TUSB213. Then, "Distortion of first Sync signal" is occurring(It is the red circle part) at circuit with CMF(Common mode filter). So, this eye pattern can’ t pass the compliance test because…
    • Resolved
    • Answered

  • TUSB213: VREG capacitor

    Resolved
    Part Number: TUSB213 Other Parts Discussed in Thread: TUSB217 , TUSB216 , TUSB217-Q1 My customer is looking to use TUSB213 as an alternative to TUSB217. The difference from a footprint perspective is the capacitor on VREG. Their current design left…
    • Resolved
    • Answered

  • TUSB213: Can the TUSB213 pad be left floating?

    Resolved
    Part Number: TUSB213 Hi, I'm designing a PCB that uses the TUSB213. Can the thermal pad of the chip be left floating, or not connected to ground (albeit soldered)? Kind regards, Samuel Lourenço
    • Resolved
    • Answered

  • TUSB213: USB device mode can't be recognize by Host (PC) after we added DC and AC gain to pass eye diagram test.

    Resolved
    Part Number: TUSB213 Other Parts Discussed in Thread: TUSB217 , TUSB216 , TUSB216I Hi, We are currently using TUSB213 in our prototype to improve our USB signal eye diagram. After applying some DC and AC gain with the signal conditioner, we are able…
    • Resolved
    • Answered

  • TUSB215: or TUSB213: CDP/SDP compatibility

    Resolved
    Part Number: TUSB215 Other Parts Discussed in Thread: TUSB217 , TPS2544 , TUSB213 Hi, My customer is using TPS2544 and TUSB217, they are looking to qualify TUSB213 and TUSB215 as alternatives. The TUSB is placed after the TPS2544 and the TPS2544 has…
    • Resolved

  • TUSB213: Infotainment host unable to identify some USB ，But remove the IC (TUSB213) then connect the signal wire directly ,It can identify this USB

    TI Thinks Resolved
    Part Number: TUSB213 Infotainment host unable to identify some USB ，But remove the IC (TUSB213) then connect the PCB signal wire PAD directly ,It can identify this USB. signal speed:full speed. Customer used a 24K ohm resistor as the REQ resistor…
    • Answered

  • TUSB213: TUSB213 EQ and BOOST setting

    Resolved
    Part Number: TUSB213 Hi Sirs, I saw the user guide of TUSB213 Evaluation Module and confused the EQ and Boost Setting on document. There used same setting value on long cable for 1~2m and 2~3m, is it correct? Regards, Henry.
    • Resolved

Didn't find what you are looking for? Post a new question.