Part Number: TUSB213 Hi,
we have some question about the application of TUSB213 . The below is our schematic
1. DC boost voltage
We choose RDC1=47kohm and RDC2=24.3kohm. but the voltage of DCboost is 40mV, not 3.3V. If we remove RDC1 and RDC2…
Part Number: TUSB213 Other Parts Discussed in Thread: TUSB217 , TUSB216 Hi Team,
We would like to realize the transmission of USB2.0 by 10m cable.
May I connect TUSB213 to series?
(Please refer to the following image.)
And, could you please…
Part Number: TUSB217-Q1 Other Parts Discussed in Thread: TUSB213 , TUSB217 , Hi Sirs,
Sorry to bother you.
We would like to know
1. What is the voltage set by the AC/DC boost setting parameters for each step?
TUSB213 show as below
2. We set…
Part Number: TUSB213 Dear Team,
There is a description on the datasheet said :
In order for the TUSB213-Q1 to recognize any change to the AC and DC Boost settings, the RSTN pin must be toggled. This is because the configuration is latched on power…
Part Number: TUSB213 Hi Team,
My customers have questions about the signal lines of application notes.
Tell me about 2 points about Figure 2. Serpentine Trace Geometry described in High-Speed Layout Guidelines for Signal Conditioners and USB Hubs…
Brian-san
Thank you for reply,
Is supply voltage involved for D1x to D2x short function?
I want to know why TUSB213/215 are not described "D2P must be shorted to D1P on PCB" and "D2N must be shorted to D1N on PCB".
If there any involved information…
Part Number: TUSB217-Q1 Other Parts Discussed in Thread: TUSB213 , TUSB217 Dear Team,
Customer would like to move TUSB213 to TUSB217.
Any key concern or schematic change needed?
Thanks
Shaq.
Part Number: TUSB213 Hi Team,
If the pull-down resistance of the connection to the EQ pin is 0 Ω (level 0), how many mA of current will flow?
Best Regards,
Kenji
